10652224102 Kenmore Refrigerator - Instructions

I saw a video of it, and simply took apart the ice maker and put the new Auger Drum in, then reassembled the ice maker.

The hard part of the repair was getting the wife to empty the refrigerator door shelves. Once that was done simply removed the three screws on the door on the top of the door removed the bottom cam located on the bottom inside of the door. One of the simplest repairs I've ever done. Watching the you-tube video was a great help.

Followed instructions in video and instructions by other home owners. Installation went very well. Parts Select shipped the repair kit. A good company to do business with. Saved a lot of money by doing the repair myself.

First of all, I am a female. So anyone can do this.I simple watched your video. Made the repair very simple. I was surprised that it really worked. I couldn't understand that if the door would still eject ice, why it wouldn't make the ice. It's the same motor. Anyway, It worked and I thank you very much. Very satisfied.

With brief instuctions it was very sraight forward. Three scews hold the motor assembly on. Ordered on a Sunday and the part was here the following Tues. Thanks Partselect

I unloaded the door, removed the cap covering the screws at the top hinge. I removed the screws then lifted the door off the pin. Next I removed the screws holding the door cams in place. Replaced both cams and screws, set the door back on the pin then reinstalled the three screws at the top. Snapped back on the cover and I was done. Door works perfectly.

Removed ice bucket so ice would not dispense while working on ice guide. Removed damaged ice guide by prying 2 clips with a flat-head screw driver. Installed new ice guide by pushing beyond final position, lower bottom clip into position, then snap 2 side clips into place.

Extremely simple especially after watching the video. Makes me think about why I did not attempt my own appliance repairs in the past. Big time savings! Thanks. P. S. excellent delivery service from Parts Select.

replaceed control motor assembly 3 screws took it off. then turned ice maker shaft by hand to line up key slot on new control unit . slid right together .ice started making within an hour . and the part got to my house the very next day after ordering awesome...

I watched the video so I had an idea of what to do. It was pretty straightforward. Turn off the water, take out the screws, line everything up, replace the part. It went smoothly and the icemaker is working again. :)

I followed instructions in the video you provided. No problem at all. Took less than an hour.

First I checked the compressor, very hot to the touch & not running. I unplugged for a few minutes to cool & when I plugged it back in, it started for maybe a second or two. Then I unplugged the relay from the compressor and new instantly it was fried. So I decided to google the issue which led me too partselect.com and I then realized this relay is called the start device/Relay and it also provides overload protection for the compressor. When I received the part or parts in this case, they came in a small box which included 2 combo relays, 2 overloads, 1 ptc start relay, 1 jumper wire, 1 electrical cover, 1 instruction sheet. By using the number on the compressor I was able to see that I needed to use the ptc start relay & one of the 2 overloads which plug onto the compressor & I needed to use the white jumper wire as the terminals were a different size on the ptc relay. At first I was a little confused because I unplugged one relay and the replacement was two separate parts. Had to read instructions carefully several times to make sure I was using the correct overload and ptc relay. I plugged in the fridge to test & it worked great so I unplugged and installed the electrical cover, reinstalled cardboard cover on back of fridge & I was done. Two weeks later fridge is working great!! Hope this helps.

Just looked at your video twice and then did it with no problems. Thanks

Unscrewed three screws, inserted new part, completed in less than 10 minutes and my icemaker works!!!! My icemaker did not work for 2 years and after spending $58, my icemaker was back in action.

I tried to just replace the cover rather than the whole unit but it was impossible - the cover would not go/stay on. I tried to remove the old unit completely but it would not unplug it was practically fused to the back of the fridge and the liner was cracking. I ended up breaking the cover and jerry rigging it over the bulb to prevent items in the fridge from being able to touch. Bad solution.