10652212100 Kenmore Refrigerator - Instructions

watched the video. If your water dispenser is working on and off and it eventual quits,it is the water control vale that needs to be replaced.

I replaced the ice maker with a new one. All part were included. The cost was about $200.00 cheaper than what the repair person wanted.

Ice maker is held on by two clips and one screw. Removed old ice maker and unplugged wiring harness. It appeared normal. Since it was 15 years old and a brand new one was only a little more than $100 I decided to just replace it. Shopped online and got best price here. Delivered promptly. Item description said it did not come with wiring harness, but mine came with three different ones. However my wiring harness had a different molded plastic connector where it is plugged into the back of the freezer so I could not just pop it off and pop in the new one. Instead I had to reuse my old one. No problem, since the harness was not damaged anyway. Also I had to reposition the harness clip on the new ice maker and remove the plastic tab on the bottom and re use the tab from my existing ice maker. The tab on the new ice maker would not line up with the hole in the freezer. All in all it took about 10 minutes total to switch the two units out. Extremely simple job, do not pay someone to do this for you.

I was unable to remove the old part so I threaded the new part in front of it. They both fit within the actuator. Done!

It tool me a while to diagnose the problem but realized the ice dispenser motor coupling had failed. It fooled me for a while because it turned on the motor but could not turn the plastic shaft inside the icemaker. I found the instructions for an almost identical repair on your website. 1)I removed the motor. In my case the wiring harness came right off.2) I turned the coupling by hand and found that although it turned, it was actually loose on the motor shaft. I then knew it was the problem. 3) The threads were apparently cross threated. 4) As a prior user suggested on your site, I used a hacksaw to cut the old coupling off, being careful to not damage the remaining threads. 5) I ordered the new coupling which arrived very quickly 6) I screwed it on to the motor shaft (remember it is a left hand thread). 7) Presto!! My icemaker works. As the other user suggested, I did not have to use washers as spacers. The new coupling was better made than the old one and actually has ~1/8" nut or spacer already welded to the coupling. My thanks to those before me who helped make this a successful repair.

Remove all items from door. Remove bolt holding plastic cover on top hinge. Support door and remove 3 bolts holding hinge. Lift door off lower hinge pin. Remove bolt holding both cam assy's and pry the one on the door out with the screwdriver. Replace both with the new cams, place door on lower hinge pin, place upper hinge pin into door, loosely insert the 3 bolts. Align the door, tighten the 3 bolts and replace plastic cap/bolt. Put the food back in the door and you're done. The only nut-driver needed is 5/16" and the screwdriver is only needed to pry out the cam that's located on the door itself.

I called a repairman, who removed the ice maker and reinstalled it, not once -but- three different times and charged me $84.60. (That's all he did.) I remembered, PartSelect, watched video, ordered motor, received in three days, installed in less than fifteen minutes. Within ten minuted water was running in and later ice was dropping into bin, next day bin was full. Wish I had trusted myself and looked up my fridge problem on PartSelect before calling that (repair) man, and saved myself $84.60. By the way, I'm a 67 year old female.

I'm sorry I can't help you with this, as one of my sons diagnosed the problem and did the repair for me. It took him maybe five minutes to swap the parts, and the ice maker has been working fine ever since.

Found video on YouTube. Ordered part from partselect. Part arrived and viewed video to refresh memory. Our refrig was a little newer than the video but the process ww was the same and quite simple after viewing the video.

The evaporator gan motor would work sometimes, but not always, so it took a while to be sure this was the problem. First ruled out thermostat and defrost timer. Also observed build up of ice on coils, so I knew compressor was working. Once I isolated problem to evaporator fan ( by observing stuck once, and seeing how it didn't spin freely) replacement was easy. In fact, since we were able to keep the unit running by watching the old fan and ensuring it was working while waiting for the new one to arrive, I was able to swap them out, plug unit back in and start it up before the ice in the bin even had time to melt! This repair saved me hundreds in repairs, and even more if I had to buy a new fridge, because the new units are too tall for my kitchen space.

The video explains it well, however, for those with the built-in model, the one with the wood panels, things are a bit different. Thanks to another writer, I received help. After you unscrew and remove the two side metal décor strips from the freezer, you are left with how to remove the no-screws décor ice/water panel. It does NOT slide out. You must carefully bend the panel out and away from its top and bottom tracks. I do wonder why not just make it slide out, but no such luck. Be careful not to over bend. However, once you begin bending from the middle out, it will become clear to you how its going to come out. Also, with this panel removed, and left hanging there, it is not necessary to unplug any of those electrical connects. The only electrical work is removing the light from the control bracket you are replacing, as shown in the video. I found bending the décor panel back in place was easier than pulling it out. Be sure to unplug the unit. Plug found at top of refrigerator behind very top wood panel. You will need to easily remove this very top wood panel, and you will need a step ladder to reach plug.

took off the faceplate and within 10 minutes job was complete.

Replacement was quite easy. Video was helpful as to how to get all pieces back on the shaft correctly. Was easy to find the correct part and was shipped quickly.

Pulled out old drawer. Slid in new drawer. Super easy!

Repaired as in your video on replacing the ice maker. Excellent.