10652203100 Kenmore Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cracked drawer
It was this simple. I removed the old drawer and slid the new one in place. I was simply amazed at how quickly I received the part. I ordered it on the 24th of July and received it on the26th.
Parts Used:
-
Dan from Covington, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Fridge door wouldn't shut on its own
We logged on looking for a possible cause and solution. We found your website, diagnosed the problem, ordered the part and it came in two days. You even had a step by step video on how to change out the part. Kudos to you. Thank You
Parts Used:
-
Catherine from Strongsville, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker would not make ice.
I followed the instructions on the PartSelect videos I found on YouTube. (turn off ice maker) 1. remove cover by GENTLY pushing pins aside, 2. remove screw underneath right/rear, 3. remove plastic thingy that the screw went through, 4. push up tabs underneath left & right, 5. slide out ice maker, 6. disconnect wiring harness, 7. pull off plastic cover (no screws), 8. remove 3 screws from controller, 9. install new controller, then reverse 1. thru 8. Unfortunately I was a little heavy handed when removing the cover and broke the bracket. I replaced it at the same time for about $10 (off & on with 2 screws).
Parts Used:
-
Robert from Rockville, MD
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Crisper drawer cracked and fell out
Simply removed the old drawer and inserted the new drawer. I ordered on Monday and the part arrived on Tuesday without paying for overnight delivery. What a pleasant surprise!!!
Parts Used:
-
Henry from Laurel, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ref door was making a popping noise
New part was not needed, when I removed lower closing cam the lower part of the closing cam attachment screw had worked it's self lose. So it just needed to be re-torqued. That took care of the problem.
Parts Used:
-
Melvin H. from Pearson, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
fridge stopped making ice
Removed cover took out 2 screws put in new unit put 2 screws back in put cover on done
Parts Used:
-
Chris from Bethel Park, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice maker stopped making ice
research of company website showed parts to buy (per percentage of failure) and how to install those parts I viewed video on installation of parts and did the job, it was a snap
Parts Used:
-
Ronald from Hebron, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
water dispenser quit working
Went to parts select and found diagram of parts then found their page that shows percentages of each part being the cause (very helpful) then I watched video of repair (very, very helpful) and fixed the problem. Your company, PartSelect is the best! Rick
Parts Used:
-
Richard from Springfield, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice shute tabs broke not allowing the guide to remain in place
Repair was easy ordered correct part according to the model number new Ice guide Shute snapped into place according to the repair video guide.
Parts Used:
-
Diane from Lawrenceville, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice Maker quit working
I followed the instructions on your video to replace the coupling. The blades were not installed correctly so using your Diagram I reinstalled the blades. and now it works great . and I would like to mention that the shipping was overnight. Thank you for your help saved me a whold bunch of cash and time.
Parts Used:
-
Michael from Oroville, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
icemaker inop would not harvest
-
howard from bruceton mills, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Drawer rail broke off
No way to fix the broken drawer. Order drawer online around 2:00 PM and replacement arrived about the same time the next day. Drawer fit perfectly. Easy to use online finding part with model number and excellent customer service.
Parts Used:
-
Cheryl from Plant City, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Handle broke off
-
Diana from Vonore, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Power Surge fried the ice maker control boards.
I was ready to spend the $$$ on a repair person when my wife (smart woman) suggested I go on line to see if we can fix it ourselves. I (luckly) found your company and your website made it easy to find the right part plus as an extra bonus you had a video that showed how to switch out both control boards. To top it off, the package came so fast ( the next day - even with standard shipping ) I did not think it was the parts. 10 or so minutes with a Phillips screwdriver and we were back in business. THANK YOU ! ! ! !
Parts Used:
-
Dennis from Powell, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Edges of the drawer were broken
Perfect fit. Slides smoothly. Arrived quickly. Thank you for a very easy web site.
Parts Used:
-
Augusta from Todd, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!