Models > 10651592010

10651592010 Kenmore Refrigerator - Overview

Get Parts and Repair Help for 10651592010

If you know the refrigerator repair part you need, you can browse the list of all parts on the 10651592010, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 10651592010 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$54.14

Crisper Drawer with Humidity Control

The humidity control allows you to adjust the humidity within the crisper. This can extend the life of the vegetables/fruit.

$29.70

Door Bin

This bin is clear with a white trim around the top edge. Sold individually.

$3.76

Lower Door Closing Cam

This door closing cam is located on the bottom of the fridge/freezer.

$2.52

Light Bulb - 40W

Sold individually.

$114.64

Ice Maker Assembly - 8 Cube

This icemaker can be used with 25-27 cubic feet refrigerators that have a vertical auger dispenser located on the freezer door. Reuse bottom bracket from the original icemaker and...

$3.82

Door Cam

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.

$53.86

Meat Pan with Handle

Sold individually.

$143.96

Electronic Control Boards - Emitter and Receiver

This set of two electronic control boards contains both the emitter and the receiver. These boards tells the icemaker when it's full and that it has to dump the ice, and it also tells the icemaker when to refill with water.

$71.06

Water Inlet Valve

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold. Note: This valv...

$8.07

Ice Guide

This ice guide is located in the freezer door.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replacing parts only

  • Customer: JULIA from BRONX, NEW YORK NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 481 of 487 people found this instruction helpful
the prices you had were great, now I see there was an increase in the parts.
thank you read more

track of the pan become broken

  • Customer: Darrell from Cedar Bluff VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 386 of 388 people found this instruction helpful
Buy a new crisper pan,slide out old one ,slide in new one read more

Ice maker stopped functioning

  • Customer: Phil from Auberry CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 252 of 263 people found this instruction helpful
Remove the icemaker service door... gently pry the door pins from the hinge sockets. Remove the 3 screws from the under side of the icemaker with a nut driver (1/4"). Gently remove the icemaker . It's a tight fit between the top of the compartment and the icemaker lower support tray. Next, disconnect the electrical connector at the right side. You're do... read more