Models > 10651282201 > Instructions

10651282201 Kenmore Refrigerator - Instructions

All Instructions for the 10651282201
1156 - 1170 of 1347
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
retaining clip for water dispenser broken
Removed and replaced retaining clip and installed a new strain relief. Parts arrived in 2 days from the time they were ordered. No problems whats-so-ever. Great doing business with Parts Select again.
Parts Used:
Strain Relief Levers Retainer/Clip
  • Ray from Marion, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken bottom refridgerator door shelf
I saw the video online and followed the easy pop in directions by pulling the open tab away from the door notch then snapping it on-fast and easy.
Parts Used:
Refrigerator Door Shelf
  • jean from tacoma, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Plastic clip broke
I bought the part from Part Select and they sent a video on how to install part.
Parts Used:
Ice Guide
  • Bradley from Clermont, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
frosted evaperator
I was a Sears repair man for fourty eight years , so I don"t think I should say how easy this was.
Parts Used:
Defrost Timer
  • Burton from Mount ShaSTA, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice Wood Freezee Up Not Drop Out
Put part on /did not see warter come at first had to go a cycal then ice again thanks alot, danny repair guy whanted 46$ to look at part. Good job.
Parts Used:
Icemaker Control Assembly
  • danny from visalia, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Icee Maker Stopped Making Ice
My ice maker has been broken since august 2011. I called my son in law, which is very handy, he looked at the broken ice maker, said he had no clue how to fix it, since its computerized. Searched the internet, found part select website, watched videos, read customers feed back, based on information provided, ordered icemaker control and motor assembly (less than $60. 00), Called my son in law, in less than 10 minutes, part was installed. The next morning the ice bin was full. I am so greatful for your website, and my wonderful son in law.
Parts Used:
Icemaker Control Assembly
  • Geula from Morganville, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice door sticking open
I followed the really great repair video on this site. I would not have been able to do it without the video. Thanks very much for the video. Once I had the front panel off, it was relatively easy. Definitely would buy here again and attempt repairs myself. Very good experience! Very happy.
Parts Used:
Ice Guide
  • Peter from Sunapee, NH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No ice
When very smoothly, as the video outlined the procedure.
Parts Used:
Icemaker Control Assembly
  • James from Thorp, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator would not dispense ice
I watched a video several time to get the steps in the removal and reinstall. It really was not that hard but first time repairs can take extra time.
Parts Used:
Ice Bin Auger Drum
  • Paul from Fort Worth, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Ice maker not dispensing correctly
Watched Video - took you through step by step
Parts Used:
Ice Bin Auger Drum
  • Frank from Las Vegas, NV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
was liquing water where enter line for ice maker
was really ease remove three scwes fron back panel plus two more screws from the water valve
Parts Used:
Water Inlet Valve
  • Robert from Hialeah, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
plastic stopper came off arm
with a mirror to see the small hole on the front side of the icemaker.... very simple, took 1 minute
Parts Used:
ARM-SHUT
  • TinTina from Bruce, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped turning out ice
Removed three screws. Removed old part. Inserted new part and reinstalled three screws. Doesn't get much easier that
Parts Used:
Icemaker Control Assembly
  • James from Wasilla, AK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Fridge door wouldn't shut on its own
We logged on looking for a possible cause and solution. We found your website, diagnosed the problem, ordered the part and it came in two days. You even had a step by step video on how to change out the part. Kudos to you. Thank You
Parts Used:
Lower Door Closing Cam
  • Catherine from Strongsville, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken drum
I took the tray out of ice maker, removed the screws holding the drum assembly. Dismantling the drum assembly careful as possible and placing the new drum on place of broken one, it still took twice to get it workable. Probably the next time I will follow the instructions a little more closely.
Parts Used:
Ice Bin Auger Drum
  • William from Petal, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10651282201
1156 - 1170 of 1347