Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 10651182110

10651182110 Kenmore Refrigerator - Overview

Get Parts and Repair Help for 10651182110

If you know the refrigerator repair part you need, you can browse the list of all parts on the 10651182110, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 10651182110 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$10.29

Air Filter

This part reduces common food odors in the refrigerator and is 15 times more powerful than baking soda. Suggested to replace every 6 months. Sold individually.

Order within the next 9 hrs and your part ships today!
$23.78

Bi-Metal Defrost Thermostat

If you have ice building up in your freezer, or if your freezer is getting too warm during the defrost cycle you may need to replace the bi-metal defrost thermostat. The function of the defrost bi-metal thermostat is to clip onto the evaporator and protect your evaporator from overheating during the defrost cycle. If your refrigerator does not defrost properly you can test both the thermostat and the heater to figure out which part is at fault. For this repair, you will need a Phillips screwdriver, a 1/4 inch nut driver, a flat blade screwdriver, a pair of wire strippers, a roll of electrical tape, and a few butt splice connectors.

Order within the next 9 hrs and your part ships today!
$47.35

Capacitor

This capacitor is also known as a run capacitor, and it is most often used in refrigerators and freezers. This part provides the voltage or energy current required to start the com...

Order within the next 9 hrs and your part ships today!
$18.16

Ice Bin Coupling

This part is located at the bottom of the ice bucket.

Order within the next 9 hrs and your part ships today!
$4.63

Thimble Top

For white, biscuit, black and stainless models.

Order within the next 9 hrs and your part ships today!
$6.07

Seal

Order within the next 9 hrs and your part ships today!
$30.23

Fan Blade

Used with Evaporator Fan Motors.

Order within the next 9 hrs and your part ships today!
$6.68

Screw

This screw is sold individually.

Order within the next 9 hrs and your part ships today!
$2.98

Screw

Sold individually.

Order within the next 9 hrs and your part ships today!
$14.48

Coupling

This coupling is used for indoor ice dispensers.

Order within the next 9 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake, MN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 228 of 252 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Fridge was getting too warm, ice buildup on coils.

  • Customer: Cathy from Winter Park, FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 127 of 141 people found this instruction helpful
WARNING: REPLACING THIS PART REQUIRES CUTTING AND SPLICING ELECTRICAL WIRES. RISK OF ELECTRICAL SHOCK OR FIRE. DO NOT ATTEMPT THIS REPAIR IF YOU ARE NOT EXPERIENCED WITH ELECTRICAL WIRING.

Part Info:
The bi-metal strip is clipped onto the evaporator coils and is designed to regulate the defrost coil temperature. If it is not functioning prope... read more

The bin coupler broke in half

  • Customer: Dan from Huntington Beach, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 52 of 58 people found this instruction helpful
When I inspected the ice bin I noticed the bin coupler was in half. So I ordered the part. I removed the screw that held in the old part. I saved the two washers. Simply following the diagram on the website made reassembly a piece of cake. It is obvious which piece is the coupling as only it can fit the other coupling. I put the screw back in and it was done read more