Models > 10650793001 > Instructions

10650793001 Kenmore Refrigerator - Instructions

All Instructions for the 10650793001
1126 - 1140 of 1350
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
ice maker dump tray was broken
removed ice maker took motor assembly off the end of ice maker, and installed the new part. this was pretty easy because I have taken it apart before. But this is not a hard job for a novice.
Parts Used:
Stripper Arm Kit
  • Donald from White Lake, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
No ice
When very smoothly, as the video outlined the procedure.
Parts Used:
Icemaker Control Assembly
  • James from Thorp, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
was liquing water where enter line for ice maker
was really ease remove three scwes fron back panel plus two more screws from the water valve
Parts Used:
Water Inlet Valve
  • Robert from Hialeah, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped turning out ice
Removed three screws. Removed old part. Inserted new part and reinstalled three screws. Doesn't get much easier that
Parts Used:
Icemaker Control Assembly
  • James from Wasilla, AK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Cracked drawer
It was this simple. I removed the old drawer and slid the new one in place. I was simply amazed at how quickly I received the part. I ordered it on the 24th of July and received it on the26th.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Dan from Covington, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Fridge door wouldn't shut on its own
We logged on looking for a possible cause and solution. We found your website, diagnosed the problem, ordered the part and it came in two days. You even had a step by step video on how to change out the part. Kudos to you. Thank You
Parts Used:
Lower Door Closing Cam
  • Catherine from Strongsville, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker would not make ice.
I followed the instructions on the PartSelect videos I found on YouTube. (turn off ice maker) 1. remove cover by GENTLY pushing pins aside, 2. remove screw underneath right/rear, 3. remove plastic thingy that the screw went through, 4. push up tabs underneath left & right, 5. slide out ice maker, 6. disconnect wiring harness, 7. pull off plastic cover (no screws), 8. remove 3 screws from controller, 9. install new controller, then reverse 1. thru 8. Unfortunately I was a little heavy handed when removing the cover and broke the bracket. I replaced it at the same time for about $10 (off & on with 2 screws).
Parts Used:
Icemaker Control Assembly Ice Maker Cover Bracket
  • Robert from Rockville, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Crisper drawer cracked and fell out
Simply removed the old drawer and inserted the new drawer. I ordered on Monday and the part arrived on Tuesday without paying for overnight delivery. What a pleasant surprise!!!
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Henry from Laurel, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ref door was making a popping noise
New part was not needed, when I removed lower closing cam the lower part of the closing cam attachment screw had worked it's self lose. So it just needed to be re-torqued. That took care of the problem.
Parts Used:
Lower Door Closing Cam
  • Melvin H. from Pearson, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
fridge stopped making ice
Removed cover took out 2 screws put in new unit put 2 screws back in put cover on done
Parts Used:
Icemaker Control Assembly
  • Chris from Bethel Park, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice maker stopped making ice
research of company website showed parts to buy (per percentage of failure) and how to install those parts I viewed video on installation of parts and did the job, it was a snap
Parts Used:
CNTRL-ELEC
  • Ronald from Hebron, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
water dispenser quit working
Went to parts select and found diagram of parts then found their page that shows percentages of each part being the cause (very helpful) then I watched video of repair (very, very helpful) and fixed the problem. Your company, PartSelect is the best! Rick
Parts Used:
Micro Switch
  • Richard from Springfield, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice shute tabs broke not allowing the guide to remain in place
Repair was easy ordered correct part according to the model number new Ice guide Shute snapped into place according to the repair video guide.
Parts Used:
Ice Guide
  • Diane from Lawrenceville, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice Maker quit working
I followed the instructions on your video to replace the coupling. The blades were not installed correctly so using your Diagram I reinstalled the blades. and now it works great . and I would like to mention that the shipping was overnight. Thank you for your help saved me a whold bunch of cash and time.
Parts Used:
Ice Bin Coupling Washer, Plain Washer, Coupling
  • Michael from Oroville, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
icemaker inop would not harvest
easy,remove old parts installed new parts,icemaker started working properly.
Parts Used:
CNTRL-ELEC
  • howard from bruceton mills, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10650793001
1126 - 1140 of 1350
Back to Top