10650785000 Kenmore Refrigerator - Instructions

Removed three screws. Removed old part. Inserted new part and reinstalled three screws. Doesn't get much easier that

It was this simple. I removed the old drawer and slid the new one in place. I was simply amazed at how quickly I received the part. I ordered it on the 24th of July and received it on the26th.

We logged on looking for a possible cause and solution. We found your website, diagnosed the problem, ordered the part and it came in two days. You even had a step by step video on how to change out the part. Kudos to you. Thank You

I followed the instructions on the PartSelect videos I found on YouTube. (turn off ice maker) 1. remove cover by GENTLY pushing pins aside, 2. remove screw underneath right/rear, 3. remove plastic thingy that the screw went through, 4. push up tabs underneath left & right, 5. slide out ice maker, 6. disconnect wiring harness, 7. pull off plastic cover (no screws), 8. remove 3 screws from controller, 9. install new controller, then reverse 1. thru 8. Unfortunately I was a little heavy handed when removing the cover and broke the bracket. I replaced it at the same time for about $10 (off & on with 2 screws).

Simply removed the old drawer and inserted the new drawer. I ordered on Monday and the part arrived on Tuesday without paying for overnight delivery. What a pleasant surprise!!!

New part was not needed, when I removed lower closing cam the lower part of the closing cam attachment screw had worked it's self lose. So it just needed to be re-torqued. That took care of the problem.

Removed cover took out 2 screws put in new unit put 2 screws back in put cover on done

research of company website showed parts to buy (per percentage of failure) and how to install those parts I viewed video on installation of parts and did the job, it was a snap

I followed the instructions on your video to replace the coupling. The blades were not installed correctly so using your Diagram I reinstalled the blades. and now it works great . and I would like to mention that the shipping was overnight. Thank you for your help saved me a whold bunch of cash and time.

easy,remove old parts installed new parts,icemaker started working properly.

No way to fix the broken drawer. Order drawer online around 2:00 PM and replacement arrived about the same time the next day. Drawer fit perfectly. Easy to use online finding part with model number and excellent customer service.

I was cleaning my refrigerator. When the glass shelf was being cleaned it barely bumped the bottom of the sink. There was no water in the sink. The shelf exploded into thousands of small pieces simular to a car windshield. I was devastated! I went online and ordered a replacement that same day. The next morning I was on my front porch watering plants when a delivery truck pulled into my driveway. It was the replacement shelf. I cannot believe the fast service. Thank you.

Located part on your easy to use and understand site.Ordered one day and received the next (less than 24 hours). Easy to install. Very pleased with this seller...A+.

Remove all items from door. Remove bolt holding plastic cover on top hinge. Support door and remove 3 bolts holding hinge. Lift door off lower hinge pin. Remove bolt holding both cam assy's and pry the one on the door out with the screwdriver. Replace both with the new cams, place door on lower hinge pin, place upper hinge pin into door, loosely insert the 3 bolts. Align the door, tighten the 3 bolts and replace plastic cap/bolt. Put the food back in the door and you're done. The only nut-driver needed is 5/16" and the screwdriver is only needed to pry out the cam that's located on the door itself.

I called a repairman, who removed the ice maker and reinstalled it, not once -but- three different times and charged me $84.60. (That's all he did.) I remembered, PartSelect, watched video, ordered motor, received in three days, installed in less than fifteen minutes. Within ten minuted water was running in and later ice was dropping into bin, next day bin was full. Wish I had trusted myself and looked up my fridge problem on PartSelect before calling that (repair) man, and saved myself $84.60. By the way, I'm a 67 year old female.