10650582000 Kenmore Refrigerator - Instructions

I followed along with the Video from the web site. I used the masking tape to keep the electric parts out of the way. one of the attaching points for the new ice door broke off so i used J B Weld to reattach it. then the repair was finished with out a hitch. The time was extended by the need to wait for the epoxy to cure

Followed the instructions on package, went extremely well, with no problems what so ever! Thanks so much for the part and how to do list!

It was fairly easy my 4 year old daughter helped me, I replaced the electronic boards with ease, the light worked but the water was not coming to the ice maker I checked the line noticed that there was Ice buildup inline so I used a tool to crush the ice and used the the turkey baster to flush the line with hot water, after that the ice maker started to work I saved a lot of money.

The ice dispensor guid went in very quickly - just as the video indicated. The rear, side stays were a little tight, but it now works great. The plastic bracket holder for the water and ice switches had broken holders for the ice switch. The video was very clear, and disconnecting the electric above the door made the job easier. My arrangement is a little different from the video (no screws holding the outside cover no the inside bracket box). But, the repair went quickly and I would have had a lot of extra problems without the video as a clear and detailed guide. My only wish was to have seen the videos before purchasing the parts. I highly recommend your parts, quick delivery, reasonable prices, and excellent video repair guides. Thanks,

My handyman did the repair. It was pretty easy for him. It would have been a real puzzle if we had not watched the video instructions. The new parts were slightly different than the old parts, but they fit perfectly. I thawed the frost buildup around the ice door and the opening of the ice bin with a hair drier, to get the ice to come out properly. Thank you so much for the video!

This was not a through the door unit. The water dispenser is located inside the refrigerator. Unplug the refrigerator. Remove the two screws holding the cover over the dispenser parts. Could not remove the cover completely as there is a water supply line attached. Let the front of the cover down as far as you can get it. The micro switch is reachable. Move plastic retaining posts holding the switch in place, to the side to release the switch. This can be done with your fingers. Pop the switch out. Use the blade of the screw driver to gently pry the electrical connection plug away from the switch. Attach the new switch to the plug and put everything back in the reverse order of disassembly. Done, easy, even I could do it.

Google refrigerator Model #, found your site, saw parts diagram right away, clicked on part 'Ice Door Kit', noticed your video on how to do repair yourself, showed it to my husband, ordered part, and it arrived the next day. That was the hardest part of the whole repair. I have been without use of the ice dispenser for about 9 months - took 20 minutes from opening box to getting ice again and saved myself a whole lot of money. I am one happy camper!!!

Job went as per your terrific video. Except that when attempting to retrieve the old heater element the glue on the old door was no long pliable. I had to literally tear the old foam apart to get at the heater element and almost damaged it. Not to worry. It worked out well and all is great. Thanks for the very instructive video.

removed the damaged unit and inserted the replacement.

Openned both doors and removed lower grille. Closed doors and placed a piece of wood underneath door. The piece of wood slightly taller so that it supports and lifts the door while I worked. Working at the bottom of the door removed both upper and lower plastic cams and replaced with new ones. Be sure to tighten the single screw that holds down the plastic cam; if you leave them loose they will split/crack because they will move as you operate the door.

I vacuumed the back and underneath, hoping it will solve the problem, but after about 2 weeks of hoping I succumbed.... finding the proper wrench was the most time consuming. After removing the screws, the face plate removal was the most challenging. You have to pry the top part carefully away (we used a knife), after it just drops down. Used a flat screw driver to loosen the wire harness, after that the rest was less than child's play. We are still in the testing mode, but so far so good. Freezer freezes, ice maker drops the ice cubes (not melting), fridge is humming. Wish us good luck.

Replaces transmitter circuit board. Removed (3) screws and replaced board and replaced back into service. very easy!

Video made troubleshooting problem easy. I ordered the parts and 5 days later I had them. 10 minutes later they were installed and that night I had ice. This is the third appliance I have repaired using the partsselect video and replacement parts. All worked well. Much cheaper than getting a technician. Thank you. Cheap Guy!

Looked at drawing to see what sequence the parts went.

Trouble shot the ice maker using the read out codes. Code indicated a faulty ice maker. Ordered a new Ice maker and replaced the faulty ice maker. Only problem is the water funnel one the new ice maker is taller. This required bending the water fill tube to slide the new unit in place.