10650552001 Kenmore Refrigerator - Instructions

Watched video on Part Select, ordered part,it arrived in three days installed same fifteen minutes had ice within one hour.Saved $300.00.Thanks Part Select.

We used the video out on YouTube to show us how to replace the drum. It made the repair go so fast that we were amazed that two klutzes could do this repair! Remove the screws that hold the housing together. Place the screws in a cup to keep everything together. Remove the spiral unit and the plastic sleeve. The hardest part was removing the auger nut on the assembly. Just remember it is a left hand turn. After that, remember sequence of the blade assembly. The video suggested that you take a picture and that would help remembering the sequence of the blades. Follow the video!

Replaced with new ice machine. Three screws to take out ice machine, took off water lines put new one in. Could not be easier.

After I ordered the parts, which was very easy to do using this website I read the other comments in reference to this repair. I am in agreement with anyone that said patience is important! The repair went about as expected, the only thing I had to do different was, after I assembled the door, it would not activate. I checked the microswitches for the ice dispenser and found that the arm on the glass bracket was not hitting the switches. I shaved off part of the horn on the back of the arm and that solved the problem!

This repair was super easy. there are only 5 screws to remove to get at the defective switch. 3 in the housing where the light bulbs are and 2 in the front trim piece where the cooling adjustment dials are. I never did unplug the fridge ,but probably should have although nothing bad happened. I removed all 5 screws using a 1/4" socket ( a nutdriver would work well also). there is also a small dia rod that comes down from the coolness adj. wheel that when you re-assemble goes though the middle of the wheel. The switch has only 2 wires that clip on with the push on flat type connectors. Very simple. I removed the wires and then the switch can be removed( it is only held in by 2 squeezable side clips). I put the new switch in and connected the wires , checked to see that the lights went on and off. which they did. then just put the screws back in.....done. also I would like to say that when I ordered my switch it came super fast. I ordered it online at 11:00am on a tuesday and it was on my doorstep in wisconsin by 10:00 am the next day...Thanks

Just replaced the thermostat and is working perfectly. I would have to tap cooler knob and it would kick on. when it ran it ran well. So i knew it had to be electrical.Put in new thermostat and is working great!

Watched the video, followed the instructions, took my time and paid attention to what came off where, and viola. Not quite as easy as the guy in the video, but then it was my first time! Bottom line is: it worked. Refrigerator/freezer now maintains temperature exactly as expected, and I saved hundreds. Thank you!

I knew my ice maker was still working and I could hear that the switch on my water was still making the usual noise when tripped, so I knew that it had to be the inlet valve. I googled some videos and luckily found PartSelect.com. I used there diagnostics, looking at the percentages of other parts used to fix like problems. The part install was very easy as all I had to do was turn off the water and unplug the frig, remove the part, cut the input line and both output lines. Then slide those into the new part, with quick connects you just slide them in, the old part had compression fittings. Reattach the new part turn on the water, plug it back up, watch for leaks, your done..pretty sweet.

Did troubleshooting as manuel indicated. Had same problem once before. The replacement did the trick.

I simply followed the video on the partselect web site on my laptop while I did the replacement and it was easy! The online videos are the greatest way to do the repairs.

I watched the video provided on your website and followed the directives. It was just as easy and simple as noted in the video.

Before purchasing the part, I watched the ParSelect installation video. The video gave me the insight as to my ability to replace the part and the correctness of the part for my ice bin. The video made it extremely easy and quick to replace the auger drum (propeller looking thing that pushes out the ice).

removed the ice maker and removed all the parts to see what was needed. Only needed the drum. Very easy to do yourself and received the part very quick. Completed the job in about four days due to waiting on part. The work to take apart and put back together about one hour.

It was nice to see that the replacement auger was made out of metal, I have a great sense of safety now. The part fit perfectly and works better than it did before!!! Thanks for the quick delivery and a better part. I give you guys 5 stars. Did I mention the price was right also!!!

This is a very easy fix. Begin by emptying the contents of the door. Then, just remove hinge cap and remove the three hinge screws. The door can then be lifted off the hinge pin and placed on its side. Once this is done, replace the two can pieces (one on the door and one on the frame). Then just lift the door back in place and secure the hinge. This job can be done by one person (maybe two if you need help place the door on a work surface) and will take just 15 minutes.