Models > 10650459901

10650459901 Kenmore Refrigerator - Overview

Get Parts and Repair Help for 10650459901

If you know the refrigerator repair part you need, you can browse the list of all parts on the 10650459901, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 10650459901 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb - 40W

Sold individually.


Lower Door Closing Cam

This door closing cam is located on the bottom of the fridge/freezer.


Door Cam - Black

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.


Water Filter Cap

Black in color.


Bi-Metal Defrost Thermostat

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.


Emitter and Receiver Boards

These boards tells the icemaker when it's full and that it has to dump the ice, and it also tells the icemaker when to refill with water.



This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.



This screw is sold individually.


Ice Bin Coupling

This part is located at the bottom of the ice bucket.


Light Rocker Switch

This light switch is triggered by the door opening and closing.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

there were directions

  • Customer: Kate from Jacksonville FL
  • Difficulty: Very Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 574 of 1018 people found this instruction helpful
We didn't know where the product went and it was very difficult to install. read more

six months the light turns red. time to replace filter

  • Customer: Leroy from Perkiomenville PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 226 of 283 people found this instruction helpful
First I shut the water off to the refrigerator.then i pushed the big button in the middle of the grille below the refrigerator door. pulled out the old filter, took the front cap off the old filter put it on the new filter. took the two red caps off the new filter. pushed the filter in till it locked in place. all done! Turned the back on. read more

Refigerator door was not closing all the way if not pushed shut.

  • Customer: Norbert from Sugar Land TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 166 of 171 people found this instruction helpful
Remove the top hinge cover. Removed the top hinge support. Lifted the door from the bottom support. Old door cams were worn completly flat. Replaced the lower door cam and closing cam use a little vasalene for lubricant on the cam surfaces. Placed the door back on the lower hinge support. Replaced the top hinge support. Door is closing great now. read more