Models > 10650452902

10650452902 Kenmore Refrigerator - Overview

Get Parts and Repair Help for 10650452902

If you know the refrigerator repair part you need, you can browse the list of all parts on the 10650452902, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 10650452902 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

$5.61

Lower Door Closing Cam

This door closing cam is located on the bottom of the fridge/freezer.

$5.74

Door Cam - Black

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.

$24.19

Bi-Metal Defrost Thermostat

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

$23.00

Refrigerator Door Shelf

This bin can be moved according to space needed. It holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves.

$29.25

Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$4.66

Screw

This screw is sold individually.

$11.07

Ice Bin Coupling

This part is located at the bottom of the ice bucket.

$8.59

Light Rocker Switch

This light switch is triggered by the door opening and closing.

$34.29

Filter Inlet Water Tube

As per the manufacturer, this part starts out as 1/4" tubing but ends up at 5/16".

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Refigerator door was not closing all the way if not pushed shut.

  • Customer: Norbert from Sugar Land TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 158 of 163 people found this instruction helpful
Remove the top hinge cover. Removed the top hinge support. Lifted the door from the bottom support. Old door cams were worn completly flat. Replaced the lower door cam and closing cam use a little vasalene for lubricant on the cam surfaces. Placed the door back on the lower hinge support. Replaced the top hinge support. Door is closing great now. read more

Ice Maker would not stop making ice.

  • Customer: Vince from El Cajon CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 140 of 153 people found this instruction helpful
First, I tested the ice maker "switch" that actually just covers the beam that regulates the ice maker. In the "off" position, it still made ice. Then, I removed the three screws on the cover over the transmitter and disconnected the circuit board at the wire connector. It stopped. After ordering and receiving the new transmitter and receiver boards, I repla... read more

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 128 of 141 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more