10650202992 Kenmore Refrigerator - Instructions

After I ordered the parts, which was very easy to do using this website I read the other comments in reference to this repair. I am in agreement with anyone that said patience is important! The repair went about as expected, the only thing I had to do different was, after I assembled the door, it would not activate. I checked the microswitches for the ice dispenser and found that the arm on the glass bracket was not hitting the switches. I shaved off part of the horn on the back of the arm and that solved the problem!

This repair was super easy. there are only 5 screws to remove to get at the defective switch. 3 in the housing where the light bulbs are and 2 in the front trim piece where the cooling adjustment dials are. I never did unplug the fridge ,but probably should have although nothing bad happened. I removed all 5 screws using a 1/4" socket ( a nutdriver would work well also). there is also a small dia rod that comes down from the coolness adj. wheel that when you re-assemble goes though the middle of the wheel. The switch has only 2 wires that clip on with the push on flat type connectors. Very simple. I removed the wires and then the switch can be removed( it is only held in by 2 squeezable side clips). I put the new switch in and connected the wires , checked to see that the lights went on and off. which they did. then just put the screws back in.....done. also I would like to say that when I ordered my switch it came super fast. I ordered it online at 11:00am on a tuesday and it was on my doorstep in wisconsin by 10:00 am the next day...Thanks

I knew my ice maker was still working and I could hear that the switch on my water was still making the usual noise when tripped, so I knew that it had to be the inlet valve. I googled some videos and luckily found PartSelect.com. I used there diagnostics, looking at the percentages of other parts used to fix like problems. The part install was very easy as all I had to do was turn off the water and unplug the frig, remove the part, cut the input line and both output lines. Then slide those into the new part, with quick connects you just slide them in, the old part had compression fittings. Reattach the new part turn on the water, plug it back up, watch for leaks, your done..pretty sweet.

Did troubleshooting as manuel indicated. Had same problem once before. The replacement did the trick.

Removed the upper door hinge and removed door. Screw holding cam could not be removed with nut driver or wrench. Used an all purpose tool cutting blade to destroy and remove closing cam. Removed screw. Installed lower door closing cam. Returned the door to original position and reinstalled the upper door hinge.

I simply followed the video on the partselect web site on my laptop while I did the replacement and it was easy! The online videos are the greatest way to do the repairs.

I watched the video provided on your website and followed the directives. It was just as easy and simple as noted in the video.

Before purchasing the part, I watched the ParSelect installation video. The video gave me the insight as to my ability to replace the part and the correctness of the part for my ice bin. The video made it extremely easy and quick to replace the auger drum (propeller looking thing that pushes out the ice).

removed the ice maker and removed all the parts to see what was needed. Only needed the drum. Very easy to do yourself and received the part very quick. Completed the job in about four days due to waiting on part. The work to take apart and put back together about one hour.

It was nice to see that the replacement auger was made out of metal, I have a great sense of safety now. The part fit perfectly and works better than it did before!!! Thanks for the quick delivery and a better part. I give you guys 5 stars. Did I mention the price was right also!!!

This is a very easy fix. Begin by emptying the contents of the door. Then, just remove hinge cap and remove the three hinge screws. The door can then be lifted off the hinge pin and placed on its side. Once this is done, replace the two can pieces (one on the door and one on the frame). Then just lift the door back in place and secure the hinge. This job can be done by one person (maybe two if you need help place the door on a work surface) and will take just 15 minutes.

The small arm in the tray for the ice maker stopped moving. I put hot water in there to see if anything was clogging up the line or the tray, but nothing was. I then pushed on the arm and it moved pretty easily. So I took off the front cover and the motor; I saw that the plastic piece connecting to the gear was broken. So I realigned and replaced the motor. Ice maker is working like a champ again.

Replaced the output nozzle and hose that goes through the door and down under the frig.Wasnt sure if I could push new hose down through door so hooked the two hoses together so I could pull the new hose into place. To hook them together i took a short screw, cut off the head and screwed it into both hoses and put one wrap of tape around it. Pulled through the first time.

First of all when deciding where to order part from I could have saved a couple of bucks on another site but I chose PartSelect because of the video showing exactly how to install the part. When installing the new part it went in exactly as described. Part seems sturdy. Ice bin now works like new again. Hopefully it will last at least as long as the original. Part was good, delivery was quick. I will look here again if I need more parts for any appliance.

Took out the door bins, 1 bolt on the plastic cap, 3 bolts on the hinge, took the door off, replaced cam at the bottom, all same size bolts, reset the door spent longer time cleaning the door selfs all done by my self in less than 30 min. others said it helped to have second pair of hands "my wife would of just got in the way :)"