10647022790 Kenmore Refrigerator - Instructions

turned off power unscrewed all the screw that mount ice maker, used flat head to release the clip on the wire harness, took out and exchanged the overfill wire, plugged the new unit in at wire harness, lined up and leveled ice maker tighten all the mounting screws, very simple repair i am very happy that you still had the orginal (OEM) ice maker, thanks Herb

googled the model of ice maker and refrigerator, ordered replacement ice maker from Part Select. Received next day, installed it in 10 minutes and it worked like a charm.

Removed three screws. Removed old part. Inserted new part and reinstalled three screws. Doesn't get much easier that

The door stop was completely bent over to the inside, preventing closure. Wife complained of door not closing by itself previously. I ordered the stop and closing cam kit.The door was easily removed after taking all food out of the door and removing the top hinge (3 screws using small socket wrench). Since the door has a magnetic seal, the door will not fall or move after this hinge is removed making the removal and installation quite easy. The door is light and was easily removed by lifting up off the bottom hinge. Once this is off, only a few screws needed to be removed to take off the door stop and cam. 2 screws hold the door stop and two screws hold the two cam pieces in place. The only difficulty was determining which of the several cams actually go on the bottom hinge. Make sure the one with the indented ring is used to go over the flanged door hole. This model did not use the cams with the flat surface or the one with the door hinge hole insert. This was a little confusing, not having the shop manual for this refrigerator. There seem to be more parts left over than those actually used. The instructions could have identified the uses a little better showing the optional models. Once everything is attached the door easily went over the bottom hinge and the door seal held the door in place while attaching the top hinge. Since this was the first time I attempted this repair, it took me a little longer to adjusting the door with the top hinge slightly loose to find the sweet spot where the door gently closes itself with total seal contact. If it breaks again, this repair shouldn't take any longer that 15 minutes.

The repair man came out and said the Ice Maker is broken.He said to call him when I get the part but after looking at the video it took 10 minutes to Install. If you can use a screw driver this part is a piece of cake. Oh don't forget to unplug the frig. God Luck John Bronx NY

Removed cover took out 2 screws put in new unit put 2 screws back in put cover on done

We suspected the thermostat assembly was the problem. We reviewed the video provided by PartSelect and accessed the thermostat assembly. To ensure the thermostat assembly was likely the culprit, we used a multimeter to test it. We ordered the assembly from PartSelect and were pleasantly surprised at the speedy delivery. Using the same video, we replaced the assembly and put the refrigerator back together. Thank you so much for saving us money we didn't have for the repairman. We will be ordering again soon to repair a leaky waterline and ice maker.

very easy two small screws, no problems

I was really surprised. It was easier than I thought. Once I l loosened bolts with nutdriver the old gasket came out with no problem. To put the new gasket on I started at the top. I just slid the gasket lip under the metal brackets on the top and then the bottom. Next I slid the gasket lip under the metal brackets on the sides. I started tightening the bolts on the top and then the bottom. I did the sides last. I don't know about you but I had set aside the whole day for this and it only took 2 hours.

I removed a few items from the freezer to make room. Husband took out the old ice maker. (We were sure it would require moving the refrigerator out which would have been a huge undertaking given the tight fit) To start he simply replaced the ice maker with the new one. I started watching...and even though it says that it will take up to 24 hours to make ice, it began making ice probably within an hour! After about 6 batches, I threw those out. (just in case there was anything in the line that would contaminate the cubes)It is obvious that the old one had not worked properly for a long time! The ice container is full to almost over-flowing! It has not been this full in a very long time, as I use ice every day! Simple fix! And might I add...LIGHTNING FAST DELIVERY!! It was here in two days! We are thrilled!!!!!

I replaced the ice maker with a new one. All part were included. The cost was about $200.00 cheaper than what the repair person wanted.

Ice maker is held on by two clips and one screw. Removed old ice maker and unplugged wiring harness. It appeared normal. Since it was 15 years old and a brand new one was only a little more than $100 I decided to just replace it. Shopped online and got best price here. Delivered promptly. Item description said it did not come with wiring harness, but mine came with three different ones. However my wiring harness had a different molded plastic connector where it is plugged into the back of the freezer so I could not just pop it off and pop in the new one. Instead I had to reuse my old one. No problem, since the harness was not damaged anyway. Also I had to reposition the harness clip on the new ice maker and remove the plastic tab on the bottom and re use the tab from my existing ice maker. The tab on the new ice maker would not line up with the hole in the freezer. All in all it took about 10 minutes total to switch the two units out. Extremely simple job, do not pay someone to do this for you.

I watched your repair video, read the instruction enclosed with the icemaker and made the repair in about 15-20 minutes. There is an issue that others need to be aware of once the water pump is repaced and the tubing is connected and the icemaker is installed and turned back on; it take 20-30 minutes to pump the air out of the line and the for the water to actually fill the the fill tray (you made the install correctly, the delay in filling is not covered by either the video or the book just be patience don't disconnect and reconnect anything it will eventually fill and make ice and less than 48 hours). This vendor offers 4 star customer service at a fair and resonable price (I priced the parts separately prior to purchase and the kit is the way to go). I received the product within 3 days, shipped groung delivery. I would use your products and online service advice for installation on other appliances in the future if needed. You have earned my trust, and repeat business in the future; and I will gladly recommend you to others. Your customer focus and service is second to none. I am a fully satisfied customer!!sincerely, a. Walker

I called a repairman, who removed the ice maker and reinstalled it, not once -but- three different times and charged me $84.60. (That's all he did.) I remembered, PartSelect, watched video, ordered motor, received in three days, installed in less than fifteen minutes. Within ten minuted water was running in and later ice was dropping into bin, next day bin was full. Wish I had trusted myself and looked up my fridge problem on PartSelect before calling that (repair) man, and saved myself $84.60. By the way, I'm a 67 year old female.

I'm sorry I can't help you with this, as one of my sons diagnosed the problem and did the repair for me. It took him maybe five minutes to swap the parts, and the ice maker has been working fine ever since.