Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 10644329400 > Instructions

10644329400 Kenmore Refrigerator - Instructions

All installation instructions for 10644329400 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 10644329400
1,021-1,035 of 1,129
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

ice maker motor burned out

  • Customer: Jennifer from INDIAN TRAIL, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
We used the you tube video on your website. It was so helpful! Sears wanted to charge us $450.00 for a 10 minute repair job, insane! thank you Part Select for saving us a ton of money.

Ice Maker Did not make ice

  • Customer: Julius from Atlanta, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I simply followed the step by step instructions demonstrated in the online videos for replacing the electronic control boards - emitter and receiver. Just that simple. 15 minutes later the repairs were completed. We've had ice ever since.

ice maker stopped harvesting ice

  • Customer: Scott from Lake George, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I checked the trouble shooting guide with the refrigerator and all signs pointed to the Electronic control boards that sense when the ice tray is full. After reading what other customer posted on this site I ordered the parts. I received the parts in two days time and had a harvest of ice within minutes of installing it. Thanks PartSelect. Scott

broke when intalling ice unit

  • Customer: bobbi from chehalis, WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
repair was not to bad. removed 3 screws, then unplug wire harness. The next thing i did was removed clip that holds pin. slid pin back enough to put new flipper in place. needs to go in front of spring.once in place slid pin back in and put clip holder back on. Then plug wire harness back in and 3 srews . done.

Ice door got freezed

  • Customer: Nivia from Miami, FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
With the flat screwdrivers, table knife or something to pull the front cover, is not easy but it will come out, patient and kepp trying until you made it, the rest is easy.

tight fit

  • Customer: George from Pflugerville, TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
With a little help of the hammer, I gently tapped the track in place. It wasn't difficult to replace. It was a tight fit, but fit. Thanks again. I will shop this site again for parts.

Ice make did not make ice

  • Customer: Susan from Collegeville, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I removed the old ice maker. disassembled the part to reattach the housing to my new part. Hooked up the wiring and reinstalled the part. VERY EASY!!!!Our repair man had quoted me a price over $500. I was all done for under $150 including a new drip guard!

Replacing Icemaker in side-by-side refrigerator

  • Customer: Lawrence from Silver Spring, MD
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
About a year ago, my icemaker stopped making ice. Knowing that a "house call" would cost a fortune, I delayed calling for a repair. Then I discovered the instructional videos on this (and other) websites. Looked like a relatively easy job. Troubleshooting the problem, however, had me scratching my head. Was it the control unit? the ice maker? the water pump? a frozen water line? A 4 day power outage allowed me to rule out the frozen line. The forum here allowed me to rule out the control unit (the blink codes indicated that it was working). So, the pump or the icemaker? Hmmm. I poured some water into the icemaker to see if it would make ice (I think that was a hint on the forum). No ice, so I ordered a new icemaker (and it arrived very quickly). It was very easy to take the old maker out. Some very minor complications with the new icemaker. First, the "funnel" for the water into the icemaker was a bit taller than the old one so had to manuever the water tube into the "funnel". The second problem is that the electrical connector on the icemaker seemed to be longer than the old one so the connector extended beyond the white cover. Not really a problem but it made it difficult to fix the cover over the wire. In the end, it just left it fitted loosely, without screwing it in place. All in all, however, a very straight forward undertaking (made even more so by the excellent videos)

The Ice Cube Maker Tray Would Not Refill With Water

  • Customer: Charles from Broadview Heights, OH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Ps328747 icemaker and water dispenser dual inlet valve was purchased from parts select. My wife, sandy, watched install video provided by parts select on their website. Sandy used plywood to protect our hard wood floor. She pulled out the refrigerator (she did need my help to do this task). Unplugged the refrigerator. I turned off water line in the basement. Sandy followed the video to the tee. Fifteen minutes later the part was installed. The ice maker tray was quickly filled with water. Ice cubes quickly were made. My wife is uniquely talented. Last winter, she remodeled two bathrooms in our naples home replacing all the fixtures, vanities, flooring, etc. My wife can do almost any task. Many years ago, I had a leaking radiator and a broken arm at the same time. What did she do--she removed the radiator from the car, took it the repair, and reinstalled the repaired radiator. Sandy plays tennis, golf, brige, hikes, sings in the church choir, works at theater as a red coat, and at 62 years of age, she tackled another item on her bucket list in january 2012. Sandy's first recital is saturday--she is quiet an accomplished pianist already. I could relate many other stories about her but the most important one is that this beautiful woman has been wife for 43 years and the mother of our two beautiful daughters, jessica and holly.

tab broken off ice guide. discolored and nasty looking. Ice maker had quit working also.

  • Customer: Jack from Casa Grande, AZ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
First we bought an icemaker from Parts Select. That repair went very easy. The old icemaker the plastic coating over the metal had started to come off. We replaced the icemaker and I waited but didn't hear it fill the ice tray I was worried then that it was a valve that was mentioned on the website. The next morning my Wife told me, we have ice I was very happy. Easy to replace the ice maker just have to unplug ours at the icemaker itself, loosen 2 bolts and it comes right out. We just purchased this house and later while we where cleaning the dispenser paddles discovered that the ICE GUIDE the bottom tab was broken off and it was badly discolored so we quickly placed a 2nd order for a new ice guide and thought as long as we where doing that pop out the ice dispenser grille and replace that. They ship quickly and prices seem reasonable. Thank you Parts Select.

ice maker stopped producing ice

  • Customer: Dennis from Lake Almanor, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 0 of 0 people found this instruction helpful
very simply followed installation instruction...removed 5 screws, disconneted electrical plug-in, installed new ice maker.

Ice Maker stopped making ice

  • Customer: Robert from Santa Maria, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The ice maker stopped making ice. Cold water was still available at the freezer door dispenser which seemed to isolate the problem to the ice maker control board/motor. My ice making unit was not identical to the one in the video, but close. After disconnecting the power, I was able to replace the control board/motor without having to remove the entire ice making unit. Total time for repair was under 15 minutes.

Ice maker stopped making ice.

  • Customer: Michael from West Palm Beach, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Undid the bolts to the ice maker, unplugged it and took it out of the freezer. Removed the cover, unplugged the motor and unscrewed the motor from the casing. To install new motor screw it into the casing, plug it in and replace the cover.

fridge started making an awful noise...still worked but noise occurred when fan kicked on

  • Customer: Diane from Rocky Mount, NC
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
My husband watched the video on the repair and followed it step by step...works like a charm! The repair shop wanted 299.55 to fix it - the part was 79.00....big savings by doing it ourselves.

ice maker wouldn't stop making ice

  • Customer: Kathryn from Lake Dallasq, TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The part arrived and we replaced both of the electronic control boards. Seemed fairly simple and immediately fixed the problem.
All Instructions for the 10644329400
1,021-1,035 of 1,129