Models > 10644322400 > Instructions

10644322400 Kenmore Refrigerator - Instructions

All installation instructions for 10644322400 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 10644322400
796-810 of 1,021
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice maker was not making ice

  • Customer: William from princeton WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
used the video on your web site. also read the overview made things really simple

In the Door Ice Maker stopped working

  • Customer: Ed from Germantown OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the instructions on the information sheet provided as well as watching a demo video on YouTube. Actual replacement of the emitter and receiver boards took only 5 minutes, but I was not sure it was working till I could here the ice maker harvesting the cubes. Still wanted to be sure so I kept an eye on it for a few hours. Each time I looked in there was more ice. I am so glad I found your website. Parts were about $106. Labor would have cost that much and the repair guy I talked to on the phone said he would probably have to replace the whole unit.

Coupling broken between ice bin and grinder unit

  • Customer: Dwight from Morehead KY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed the ice bin, removed small screw in bottom of grinder (visible from bottom). placed new coupling on shaft, inserted new screw and was finished. Super fast.

Coupler between ice tray and chute broken.

  • Customer: Leonard from Philadelphia PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Followed your expert instructions, no problem. Less than 20 minutes.

Ice Maker quit working

  • Customer: Michael from Oroville CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the instructions on your video to replace the coupling. The blades were not installed correctly so using your Diagram I reinstalled the blades. and now it works great . and I would like to mention that the shipping was overnight. Thank you for your help saved me a whold bunch of cash and time.

coupling broke apart

  • Customer: Rodney from Troy IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
simple remove and replace

Frozen shaft

  • Customer: Andy from Elizabeth IN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I still have the parts, which look great. My son completely emptied to ice bin, de-iced the unit, cleaned the coupling.... it works.

Ice Maker quit working

  • Customer: David from Castalia OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Had to Test Seloind. It Was OK. Then tested Motor Motor For Ice Maker. It Was Bad. Went Online Looked Up Parts For My Unit. They Were Shipped in a Timely Manner, only a few days. Installed parts in less than 15 minutes. Went very easy. Thank You

Ice maker was not working

  • Customer: Brian from Potomac IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
The repair was surprisingly easy. Definitely much cheaper than calling a repair man! Very pleased with PartSelect....speedy shipping and great customer service. Would do business with you again, if need be.

ice maker stopped producing ice

  • Customer: Dennis from Lake Almanor CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 0 of 0 people found this instruction helpful
very simply followed installation instruction...removed 5 screws, disconneted electrical plug-in, installed new ice maker.

ice maker motor burned out

  • Customer: Jennifer from INDIAN TRAIL NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
We used the you tube video on your website. It was so helpful! Sears wanted to charge us $450.00 for a 10 minute repair job, insane! thank you Part Select for saving us a ton of money.

Ice make did not make ice

  • Customer: Susan from Collegeville PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I removed the old ice maker. disassembled the part to reattach the housing to my new part. Hooked up the wiring and reinstalled the part. VERY EASY!!!!Our repair man had quoted me a price over $500. I was all done for under $150 including a new drip guard!

Replacing Icemaker in side-by-side refrigerator

  • Customer: Lawrence from Silver Spring MD
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
About a year ago, my icemaker stopped making ice. Knowing that a "house call" would cost a fortune, I delayed calling for a repair. Then I discovered the instructional videos on this (and other) websites. Looked like a relatively easy job. Troubleshooting the problem, however, had me scratching my head. Was it the control unit? the ice maker? the water pump? a frozen water line? A 4 day power outage allowed me to rule out the frozen line. The forum here allowed me to rule out the control unit (the blink codes indicated that it was working). So, the pump or the icemaker? Hmmm. I poured some water into the icemaker to see if it would make ice (I think that was a hint on the forum). No ice, so I ordered a new icemaker (and it arrived very quickly). It was very easy to take the old maker out. Some very minor complications with the new icemaker. First, the "funnel" for the water into the icemaker was a bit taller than the old one so had to manuever the water tube into the "funnel". The second problem is that the electrical connector on the icemaker seemed to be longer than the old one so the connector extended beyond the white cover. Not really a problem but it made it difficult to fix the cover over the wire. In the end, it just left it fitted loosely, without screwing it in place. All in all, however, a very straight forward undertaking (made even more so by the excellent videos)

Icemaker stopped making ice.

  • Customer: Jim from Canyon Country CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
My icemaker lasted about 3.5 years which appears to be longer than most. I first verified that the IR sensor blink codes were OK. Open the freezer and view the status led. Press the emitter flapper to unblock the optics beam. If the LED is on steady: The optics are working properly. If 2 BLINKS FOLLOWED BY 1 SEC. DELAY(Then repeated) The optics are faulty. Replace the emitter and receiver boards. In my case, I need to replace the icemaker. First watch the video. It will show you the hard to see screw and hidden plastic tabs to release the icemaker. Next remove power from the refrigerator. Remove the rear screw and use a flat blade screw driver for the tabs. The fill tube on on my icemaker was a bit longer than in the video so it caught on the icemaker. Carefully bend the rubber tube and the unit will slide out. The electrical connector has a release tab and may required a bit of effort to pull apart. Transfer the other parts per the video. Then reverse the procedure. This really is an easy repair and the video removes the guess work. The ordering process from PartSelect went smoothly and I received the part in 3 days. This is my second order from them and I am very satisfied.

ice maker

  • Customer: John from Huston TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
video terrific...... could not tell on unit the type of electrical harness tab ..which showed on video and I changed quickly ....spent more time on extraneous ice.....sales rep was extremely helpful in picking the right unit...which I would not have been able to do from my model #....recived unit in two days.........
All Instructions for the 10644322400
796-810 of 1,021