Models > 10640562010 > Instructions

10640562010 Kenmore Refrigerator - Instructions

All installation instructions for 10640562010 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 10640562010
376-380 of 380
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

door made clacking , thunking noise when opened

  • Customer: BILL from ADVANCE NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
remove contents of door-----------hardest part of chore remove top hinge cover remove three top hinge screws remove door and lay on table remove two screws holding black plastic cam piece in door, remove black plastic piece (slightly held in by some type of mastic) just pull till it comes our insert new piece, insert two screws lubricate parts mount door on hinge pin insert tip hinge pin and plate and fasten with three screws attach cover............reload refrigerator door taking opportunity to throw out old bottles and mystery jars Finis

replacement shelf w/glass and drawer

  • Customer: Gaylan from Gibbon NE
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed old, replaced shelf and slid in new drawer

Original wheel broke in half,

  • Customer: Steve from Washington IA
  • Difficulty: Very Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
The diagram of the whirlpool refrigerator that I used for the part wasn't anything like what was on the refrigerator we have ,had to remove the old axle and broken wheel and replace wheel and axle with the existing housing that was there good thing the wheel was the same a lot of wasted time and money for just a wheel,I'll never use this site again!

broken fan blade

  • Customer: David from Ceres CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
unplug refrigerator, take backing off with nut driver. Pull old blade off and put new blade on. Put backing back on and plug in.

To install new refigerator shelf

  • Customer: Michael from Port Orchard WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
1. Cleared all the food items off the broken shelf. 2. Removed the old shelf. 3. Removed the new shelf from the shipping box. 4. Inserted the new shelf. 5. Replaced food items.
All Instructions for the 10640562010
376-380 of 380