Models > 1053B2A > Instructions

1053B2A Roper Oven - Instructions

All installation instructions for 1053B2A parts

These instructions have been submitted by other PartSelect customers and can help guide you through the oven repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 1053B2A
1-1 of 1
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light wont come on

  • Customer: James from Fort Collins CO
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 2 of 4 people found this instruction helpful
Well, when you put the back cover on and screw it down make sure you have nothing touching the white wire leading to the oven light. I did and it blew the push switch when I threw the 220 breaker. Actually, the light was on when I came in the room, but when I pushed the switch on the front panel it sparked in the rear and popped the breaker. Then I saw the short and when I tested the switch it would not click. The install was fine.
All Instructions for the 1053B2A
1-1 of 1