Models > 103726

103726 Kenmore Range - Overview

Parts and Repair Help for models starting with 103726

If you know the range repair part you need, you can browse the list of all parts for models starting with 103726, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 103726 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with 103726

Exact Part matches for your search term [Viewing 2 of 2]

$178.32

DISPLAY MODULE, LED, DBL

This part number matches the current model number "103726".

Wire-Ground (Hour Meter)

This part number matches the current model number "103726".

$2.52

Light Bulb - 40W

Sold individually.

$67.93

Round Style Oven Igniter

Be very careful when handling this igniter as it is very fragile. This igniter has a range of 2.5 to 3.0 amps. Please note - this will not replace the flat style igniters. Also known as bake and broil igniter.

$2.36

SCREW

Sold Individually.

$2.79

Screw

Sold Individually.

$2.23

SCREW

$16.83

Washer - 12 Pack

$81.16

Inner Door Glass

$2.42

SCREW-ADJUST

$34.25

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap

$16.58

IGNITER

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No ignition

  • Customer: Mark from Upland CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 482 of 490 people found this instruction helpful
Unplug the oven.
Open the oven door.
Remove the racks.
Remove the two screws that hold the oven floor; they are located toward the back.
Remove the oven floor pan.
Remove the screw holding the heat shield/dispenser.
Remove the heat shield/dispenser.
Untwist the ceramic wire caps on the two igniter wires.
Remove the two... read more

broiler works, bake oven does not work.

  • Customer: Robert from Hebron CT
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 512 of 685 people found this instruction helpful
Your website help me troubleshoot the problem and locate the part. Part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL.
Gas will not flow if the igniter is bad. Gas will only flow if the igniter heats up the internal bimetal strip which in turn, allows gas to flow t... read more

Oven igniter failed to heat up and ignite the gas burner.

  • Customer: Paul from Santa Rosa CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 301 of 455 people found this instruction helpful
Before starting it's a good idea to disconnect the electricity and turn the gas valve off behind the stove.

Next, uncrew the two finger-screws at the back of the oven that hold the porcelain & steel drip plate in. It comes out if you push it towards the back of the oven and lift it out. This reveals the burner and the cylindrical igniter attac... read more