Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 1036427612

1036427612 Kenmore Range - Overview

Get Parts and Repair Help for 1036427612

If you know the range repair part you need, you can browse the list of all parts on the 1036427612, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 1036427612 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$10.56

Drip Bowl - 6"

This six inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units.

$9.68

Drip Bowl - 8"

Sold individually. This part is located beneath the element and catches any spills.

$26.73

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$7.05

Single Heating Element Support Clip

This metallic clip is used to help support the broil element. Sold individually.

$47.67

Broil Element - 3400W 240V

$28.37

Rear Drawer Glide

Also called Rear Block.

$3.26

Screw

Sold Individually.

$6.12

SCREW

$0.92

SPACER-HNDL

$49.85

GASKET

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Large burner would operate on high setting only.

  • Customer: Ernest from Bellevue, NE
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 15 of 17 people found this instruction helpful
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel. read more

Heating element dangling

  • Customer: Victor from Miami Beach, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 7 people found this instruction helpful
Snapped in the clip read more

Broiler element would not work/heat up

  • Customer: Kelvin from Helena, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
First I turned the power off at the breaker box. Then I removed the two screws at the rear of the oven and un-secured the three clips(top of stove) that all hold the element in place. Carefully I pulled the element out of the back of the stove to expose and pull out the electrical wires and their connectors. At this point I used the multimeter to CONFIRM no ... read more