Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 1034367711

1034367711 Kenmore Cooktop - Overview

Get Parts and Repair Help for 1034367711

If you know the cooktop repair part you need, you can browse the list of all parts on the 1034367711, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$10.56

Drip Bowl - 6"

This six inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units.

$9.58

Drip Bowl - 8"

Sold individually. This part is located beneath the element and catches any spills.

$26.41

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$2.91

SCREW

Sold Individually.

$3.33

Screw

Sold Individually.

$41.24

IND LIGHT

$4.46

CONTROL SEAL

$2.70

SCW 8ABX.250

$1.65

NUT

DISCONTINUED

Common Symptoms of the 1034367711

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Large burner would operate on high setting only.

  • Customer: Ernest from Bellevue, NE
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 15 of 17 people found this instruction helpful
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel. read more

Right front burner out.

  • Customer: Larry from Prairie Village, KS
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 4 of 7 people found this instruction helpful
Ever the optimist, I'd replaced the burner on this relic of another time to no effect. That left the switch. You guys should know that when a burner element goes bad it can take out the switch. I should have put a meter on it. Wehn I looked for a replacement a few months ago there were still factory parts available, but they were $80 or so and I wasn't incli... read more

Swicth Stem Broken

  • Customer: FRANK from COPAKE, NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 3 of 5 people found this instruction helpful
Disconnect power. . . Remove control panel, pull wire connectors,[note location] remove old switch, install new, install wires, snip stem to length, set knob . . . Turn on power - works. [Note this is a live part even when not connected] read more