Models > 1034367281

1034367281 Kenmore Cooktop - Overview

Sections of the 1034367281

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Drip Bowl - 6 Inch – Part Number: WB32X107
Drip Bowl - 6 Inch
★★★★★
★★★★★
(23)
PartSelect #: PS244697
Manufacturer #: WB32X107
The drip bowl on your range is designed to catch any spills that may occur when cooking. This drip bowl is chrome in color and is 6 inches in diameter. The chrome drip bowl is intended for use with ro...
$11.92
  In Stock
Drip Bowl - 8 Inch – Part Number: WB32X106
Drip Bowl - 8 Inch
★★★★★
★★★★★
(15)
PartSelect #: PS244696
Manufacturer #: WB32X106
Drip bowls are located under the heating elements and catch grease and spills that come from cooking on your stove top. If your drip bowl is damaged or rusted, it could allow grease to drip inside you...
$22.07
  In Stock
Surface Burner Terminal Block Kit – Part Number: WB17X210
Surface Burner Terminal Block Kit
★★★★★
★★★★★
(6)
PartSelect #: PS232606
Manufacturer #: WB17X210
This is a surface burner terminal block kit, also known as range surface element receptacle, for an oven, range, or stove. The kit comes with the terminal block, mounting clip, and wires. This surface...
$78.35
  In Stock
Ignitor Mounting Screw – Part Number: WB1X1293
Ignitor Mounting Screw
★★★★★
★★★★★
(2)
PartSelect #: PS234519
Manufacturer #: WB1X1293
Sold Individually.
$9.64
  In Stock
Screw – Part Number: WB1X1130
Screw
★★★★★
★★★★★
(2)
PartSelect #: PS234427
Manufacturer #: WB1X1130
Sold Individually.
$8.30
  On Order
CONTROL SEAL – Part Number: WB6X3
CONTROL SEAL
PartSelect #: PS255079
Manufacturer #: WB6X3
$8.06
  Special Order
SCW 8ABX.250 – Part Number: WB1X1425
SCW 8ABX.250
PartSelect #: PS234582
Manufacturer #: WB1X1425
$8.06
  Special Order
Nut – Part Number: WB1X1129
Nut
PartSelect #: PS234426
Manufacturer #: WB1X1129
Sold individually.
  No Longer Available
DISCONTINUED – Part Number: WB23M5
DISCONTINUED
PartSelect #: PS236388
Manufacturer #: WB23M5
$99.85
  Special Order
SCREW – Part Number: WB1X1297
SCREW
PartSelect #: PS234523
Manufacturer #: WB1X1297
$8.02
  Special Order
SPEED NUT – Part Number: WB1X1311
SPEED NUT
PartSelect #: PS234535
Manufacturer #: WB1X1311
$6.80
  Special Order
DISCONTINUED – Part Number: WB49X641
DISCONTINUED
PartSelect #: PS250226
Manufacturer #: WB49X641
$43.24
  Special Order

Questions And Answers for 1034367281

Be the first to ask our experts a question about this model!

Common Symptoms of the 1034367281

[Viewing 2 of 2]
Element will not heat
Fixed by
these parts
Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
There was no heat on the coils.
I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe.
Parts Used:
Surface Burner Terminal Block Kit
  • Shaohui from East Lansing, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
48 of 52 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface burner coil did not work.
TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet, but needed one. The wire from burner coil to switch runs through a harness which is screwed on to the body of the oven (below the range). Be careful NOT to drop it behind oven when taking it out. I dropped it and took forever to get it. That turned a 20 minuate job into an hour and a half. Otherwise this is an easy job that anyone can do. Refrigerator compressor is next. Have fun.
Parts Used:
Surface Burner Terminal Block Kit
  • Gregory from Mont Belvieu, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
23 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Could not find the correct replacements (burners & drip pans)
After months of buying the wrong parts & cost I discovered this site So easy to order & quick delivery, plus very easy installation. Thank you. I also wanted to add that the reps (Tanisha & Matthew) were extremely helpful & informative. I can only hope all the reps equal their performance. I will definitely be using this site, before any other source. Knowledge & cost is also important to me & that need was met. Good job!
Parts Used:
Drip Bowl - 6 Inch Drip Bowl - 8 Inch
  • Barbara from JEFFERSON, GA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
13 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!