Models > 1034347262

1034347262 Kenmore Dishwasher - Overview

Get Parts and Repair Help for 1034347262

If you know the dishwasher repair part you need, you can browse the list of all parts on the 1034347262, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for 1034347262 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$7.48

Drip Bowl - 6"

This six inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units.

$8.98

Drip Bowl - 8"

$40.76

Surface Burner Terminal Block Kit

This kit comes with the terminal block, mounting clip and wires.

$2.36

SCREW

Sold Individually.

$3.62

CONTROL SEAL

$1.46

NUT

$2.79

SCREW

$2.79

SPEED NUT

$2.19

SCREW

WIRE HARNESS-ELEMENTS

Common Symptoms of the 1034347262 [Viewing 1 of 160]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

There was no heat on the coils.

  • Customer: Shaohui from East Lansing MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 20 of 22 people found this instruction helpful
I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe. read more

Surface burner coil did not work.

  • Customer: Gregory from Mont Belvieu TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 14 of 17 people found this instruction helpful
TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet, but needed one. T... read more

Have tried 3 different store-bought drip pan sets over the past year. None of them laid flat.

  • Customer: Jennifer from Saginaw MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 10 people found this instruction helpful
Simple installation of new pans and all are level! Thank heaven! Thank you, PartSelect! read more