Models > 1033658710

1033658710 Kenmore Range - Overview

Get Parts and Repair Help for 1033658710

If you know the range repair part you need, you can browse the list of all parts on the 1033658710, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 1033658710 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.82

Light Bulb - 40W

Sold individually.

$69.05

Round Style Oven Igniter

Be very careful when handling this igniter as it is very fragile. This igniter has a range of 2.5 to 3.0 amps. Please note - this will not replace the flat style igniters. Also known as bake and broil igniter.

$16.87

Broiler Pan - Large

Includes the pan and grate.

$14.95

Gas Range Drip Pan

This chrome drip pan is sold individually.

$2.36

Single Screw Only

Sold Individually.

$2.79

Screw

Sold Individually.

$3.00

Light Lens

$2.36

Light Lens Gasket

$106.14

Oven Rack

$39.90

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broiler works, bake oven does not work.

  • Customer: Robert from Hebron CT
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 423 of 516 people found this instruction helpful
Your website help me troubleshoot the problem and locate the part. Part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL.
Gas will not flow if the igniter is bad. Gas will only flow if the igniter heats up the internal bimetal strip which in turn, allows gas to flow t... read more

Oven igniter failed to heat up and ignite the gas burner.

  • Customer: Paul from Santa Rosa CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 218 of 294 people found this instruction helpful
Before starting it's a good idea to disconnect the electricity and turn the gas valve off behind the stove.

Next, uncrew the two finger-screws at the back of the oven that hold the porcelain & steel drip plate in. It comes out if you push it towards the back of the oven and lift it out. This reveals the burner and the cylindrical igniter attac... read more

Oven would no longer light, main gas valve would not open, no glow from igniter

  • Customer: Jeffrey from Crystal Lake IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 134 of 202 people found this instruction helpful
The repair was fairly straight forward.

Step 1: Remove the storage drawer from below the oven and disconnect A/C power.
Step 2: Using nutdriver, remove the 2 machine screws in the front and 2 on the sides that hold the silver cover plate under the oven.
Step 3: Disconnect the 2 wires going to the igniter and remove the 2 bolts holding... read more