Models > 0911

0911 - Overview

Models starting with 0911

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Plug-Spark – Part Number: 796112S
Plug-Spark
★★★★★
★★★★★
(1)
PartSelect #: PS9140427
Manufacturer #: 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process...
$4.99
  In Stock
Nut-Lock, Ni – Part Number: 3296-42
Nut-Lock, Ni
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$3.99
  In Stock
Filter – Part Number: 298090S
Filter
PartSelect #: PS9275043
Manufacturer #: 298090S
This is a round, inline fuel filter with 0.25-inch nipples, used in a variety of lawn and garden equipment. It is sourced from the original equipment manufacturer and has the capability to filter out ...
$4.99
  In Stock
Pulley-Starter – Part Number: 295871
Pulley-Starter
PartSelect #: PS8942071
Manufacturer #: 295871
$15.80
  In Stock
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$4.99
  In Stock
Gasket-Cylinder Head – Part Number: 272157S
Gasket-Cylinder Head
PartSelect #: PS8941204
Manufacturer #: 272157S
The cylinder head gasket, also known just as the head gasket, is an OEM part sold individually. Grey in color, the head gasket provides a seal between the cylinder head and the engine block in your en...
$6.91
  In Stock
Clutch-Starter – Part Number: 399671
Clutch-Starter
★★★★★
★★★★★
(2)
PartSelect #: PS8968281
Manufacturer #: 399671
$37.32
  In Stock
Seal-Oil – Part Number: 299819S
Seal-Oil
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$5.99
  In Stock
Magneto – Part Number: 397358
Magneto
PartSelect #: PS9278124
Manufacturer #: 397358
$58.83
  In Stock
Gasket-Intake – Part Number: 27355S
Gasket-Intake
PartSelect #: PS8941014
Manufacturer #: 27355S
$4.99
  In Stock
Gasket-Breather – Part Number: 27549S
Gasket-Breather
PartSelect #: PS8943888
Manufacturer #: 27549S
The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will requir...
$4.99
  In Stock
Gasket- Exhaust – Part Number: 692237
Gasket- Exhaust
★★★★★
★★★★★
(1)
PartSelect #: PS9294810
Manufacturer #: 692237
$5.71
  In Stock
View More
Back to Top

Common Symptoms of models starting with 0911

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Parts Used:
Magneto
  • Thomas from ALFRED, ME
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
11 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Parts Used:
Key-Ignition
  • Michelle from AYLETT, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
Gasket- Exhaust
  • Alberto from PALMETTO BAY, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
8 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top