Models > 0062200

0062200 ((7216512 - 7360829)(2012)) Generac Generator - Overview

Sections of the 0062200

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Fuel Gage, 153 Mm Long Arm – Part Number: 0H1345
Fuel Gage, 153 Mm Long Arm
★★★★★
★★★★★
(1)
PartSelect #: PS9874231
Manufacturer #: 0H1345
$12.94
  In Stock
Brush Holder – Part Number: 0H0919
Brush Holder
PartSelect #: PS9874210
Manufacturer #: 0H0919
$4.99
  In Stock
Switch, Start-Run-Stop – Part Number: 0G9549
Switch, Start-Run-Stop
PartSelect #: PS9874159
Manufacturer #: 0G9549
$17.92
  In Stock
Fuel Filter – Part Number: 0H1326
Fuel Filter
PartSelect #: PS9874228
Manufacturer #: 0H1326
$4.99
  In Stock
Cover, Air Cleaner 13Gn – Part Number: 073104B
Cover, Air Cleaner 13Gn
PartSelect #: PS9870257
Manufacturer #: 073104B
$27.89
  In Stock
Push Rod 174.9 – Part Number: 0D9853B
Push Rod 174.9
★★★★★
★★★★★
(1)
PartSelect #: PS9873882
Manufacturer #: 0D9853B
$9.46
  In Stock
Battery – Part Number: 0G9449
Battery
PartSelect #: PS9874156
Manufacturer #: 0G9449
$57.28
  In Stock
Cover,30A 120/240V – Part Number: 0G9391
Cover,30A 120/240V
PartSelect #: PS9874151
Manufacturer #: 0G9391
$34.58
  In Stock
Spring, Anti-Lash – Part Number: 0C3978
Spring, Anti-Lash
PartSelect #: PS9873576
Manufacturer #: 0C3978
$3.99
  In Stock
Spark Plug Gap: 0.030" – Part Number: 0E7585
Spark Plug Gap: 0.030"
PartSelect #: PS9873931
Manufacturer #: 0E7585
$5.56
  In Stock
Seal, 35 I.D. Crankshaft – Part Number: 0E3812
Seal, 35 I.D. Crankshaft
PartSelect #: PS9873909
Manufacturer #: 0E3812
$11.43
  Special Order
Clamp, Hose Band Green – Part Number: 048031G
Clamp, Hose Band Green
PartSelect #: PS9868951
Manufacturer #: 048031G
$3.99
  In Stock

Questions And Answers for 0062200

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fuel gauge on generator fuel tank was no longer showing the fuel level.
Repair was very simple. Removed two screws securing the fuel gauge to the tank. Pull out old gauge, insert new gauge, and install the two screws. Done! The replacement part did not include the sticker around the sight window on the gauge. Peeled the sticker off the old gauge, applied a little Gorilla glue and placed the sticker on the new gauge.
Parts Used:
Fuel Gage, 153 Mm Long Arm
  • John from THE WOODLANDS, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!