Models > 0056960

0056960 (( 5269651 - 5269750)) Generac Generator - Overview

Sections of the 0056960

[Viewing 1 of 1]

Exact Part matches for your search term

[Viewing 1 of 1]
DISCONTINUED – Part Number: Y0056960
DISCONTINUED
This part number matches the current model number 0056960
PartSelect #: PS2186514
Manufacturer #: Y0056960
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Wheel, Inch 9.5 Dia, Plastic – Part Number: 0G8651
Wheel, Inch 9.5 Dia, Plastic
PartSelect #: PS9874123
Manufacturer #: 0G8651
$38.27
  In Stock
Order within the next 12 hrs and your part ships today!
Carburetor – Part Number: 0A4600
Carburetor
PartSelect #: PS9873484
Manufacturer #: 0A4600
$123.64
  In Stock
Order within the next 12 hrs and your part ships today!
Outlet 30A120/250V Spcgr – Part Number: 0G8758
Outlet 30A120/250V Spcgr
PartSelect #: PS9874125
Manufacturer #: 0G8758
$24.92
  In Stock
Order within the next 12 hrs and your part ships today!
Fuel Filter – Part Number: 0H1326
Fuel Filter
PartSelect #: PS9874228
Manufacturer #: 0H1326
$4.99
  In Stock
Order within the next 12 hrs and your part ships today!
Cover, Air Cleaner 13Gn – Part Number: 073104B
Cover, Air Cleaner 13Gn
PartSelect #: PS9870257
Manufacturer #: 073104B
$27.89
  In Stock
Order within the next 12 hrs and your part ships today!
Push Rod 174.9 – Part Number: 0D9853B
Push Rod 174.9
★★★★★
★★★★★
(1)
PartSelect #: PS9873882
Manufacturer #: 0D9853B
$9.46
  In Stock
Order within the next 12 hrs and your part ships today!
Element, Air Filter – Part Number: 073111S
Element, Air Filter
PartSelect #: PS9870259
Manufacturer #: 073111S
$19.46
  In Stock
Order within the next 12 hrs and your part ships today!
Capacitor – Part Number: 0G5958
Capacitor
PartSelect #: PS9874077
Manufacturer #: 0G5958
$40.10
  In Stock
Order within the next 12 hrs and your part ships today!
Spring, Anti-Lash – Part Number: 0C3978
Spring, Anti-Lash
PartSelect #: PS9873576
Manufacturer #: 0C3978
$3.99
  In Stock
Order within the next 12 hrs and your part ships today!
Filter, Fuel Valve – Part Number: 0H1613
Filter, Fuel Valve
PartSelect #: PS9874246
Manufacturer #: 0H1613
$3.99
  In Stock
Order within the next 12 hrs and your part ships today!
Spark Plug Gap: 0.030" – Part Number: 0E7585
Spark Plug Gap: 0.030"
PartSelect #: PS9873931
Manufacturer #: 0E7585
$5.56
  In Stock
Order within the next 12 hrs and your part ships today!
Seal, 35 I.D. Crankshaft – Part Number: 0E3812
Seal, 35 I.D. Crankshaft
PartSelect #: PS9873909
Manufacturer #: 0E3812
$11.43
  Special Order

Questions And Answers for 0056960

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Carberator gummed up from sitting in storage. Fuel gone bad in the tank
With a 12-in-one nut screwdriver I removed the two bolts holding the breather cover and air filter. Then I used about a 9/16 deep socket ratchet to remove the nuts holding the breather housing to the carburetor assembly studs. A pair of needle nose pliers was used to disconnect the throttle then I wriggled the breather cover away from the carburetor so I could get to the fuel line. I managed to pull the fuel line off the carburetor and from the shut-off valve at the tank. The carburetor slid freely and easily off the carburetor studs and I was careful not to damage the carburetor gasket since none came with the new carburetor. I used a single edge razor blade to free the gasket from the old carburetor. A very small amount of silicone lube was used on the gasket and then I sandwiched the old gasket between the carburetor intake and the new carburetor and attached the throttle connection. Before beginning the reassembly I unscrewed the shut-off valve from the tank and used a funnel to drain the very old fuel into a 5-gallon bucket. I made sure the valve was clean by spraying carburetor cleaner through it and did the same with the old fuel line, making sure everything was clear of any obstruction. Then replace the breather assembly back over the carburetor studs, snugged the nuts back on and then replaced the air filter and cover. I re-attached the fuel line to the fuel valve and the carburetor, added a half gallon of clean fresh fuel and was ready for a smoke check. Pulled the starter rope three times with the choke full on, then turned to half-choke and the puppy started right off. I then turned the choke completely off and the engined purred along. I then exercised the generator by plugging in and running a number of power tools for about 15 minutes. Followed standard shut off procedures and the generator is ready for use. Saving the old carburetor to be cleaned and held on reserve for the future. Might want to have another gasket handy or some gasket material should it have to be replaced in the future.
Parts Used:
Carburetor
  • Robert from BATON ROUGE, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!