Kenmore Refrigerator Dispensers

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Kenmore Appliance Parts
Shop By Part Type

Popular Kenmore Refrigerator Dispensers

Videos!
Your Price
$19.46
  In Stock
Kenmore Refrigerator Ice Guide
★★★★★
★★★★★
60 Reviews
PartSelect Number PS11739026
Manufacturer Part Number WP2180224
This is a refrigerator ice guide that is made entirely of clear plastic. This ice guide is located in the freezer door. Turn your refrigerator ice dispenser off before replacing the part. This is a simple repair, and the only tool you will need is a small flat blade screwdriver to push on the pivot tab on the bottom of the ice guide. Do not worry about breaking the side or pivot tabs on your existing ice guide because it will be discarded anyway. This is a genuine manufacturer replacement part.
Fixes these symptoms
  • Door Sweating
  • Ice maker dispenses too much ice
  • Ice maker not making ice
  • See more...
Installation Instructions
Tracy from Jacksonville, FL
External Ice Guide Broke a Tooth and Fell Off
We waited two years to do this because we didn't want to hassle with a repair man to come out and charge us arm+leg for something so simple. Finally we searched and found the part on line. It came two days FASTER than promised. Kudos to Part Select.
Snapping it on was a breeze, although you do have to apply more pressure than feels comfortable with plastic clips. We can know get ice out of the external door system again. Read more...
Videos!
Your Price
$15.58
  In Stock
Kenmore Refrigerator Dispenser Door Assembly or Flapper
★★★★★
★★★★★
87 Reviews
PartSelect Number PS964304
Manufacturer Part Number WR17X11653
This “Dispenser Door Assembly” (Door Recess Assembly, Ice Door Assembly, Dispenser Door, Refrigerator Dispenser Ice Chute Door Kit, Dispenser Door Flap, Ice Chute Door, Flapper) keeps the room air from infiltrating the freezer. Once the lever is pressed, the door flap opens and allows the ice to dispense into your container. If your door flapper is broken, it could allow outside air to enter the freezer and alter the inside temperature. You may notice frost buildup surrounding the dispenser area. The door flap can disconnect from the dispenser lever, or the tabs that hold it in place may break. Frequent use may distort the sealing face and cause air leaks and frost buildup. This part mounts in the ice dispenser, and measures approximately 3.25 inches in diameter. It is constructed of plastic and rubber, and comes in white/black. This part is sold individually.
Fixes these symptoms
  • Door Sweating
  • Door won’t open or close
  • Freezer not defrosting
  • See more...
Installation Instructions
ALBERT from RALEIGH, NC
Our Ice Damper was warped, which let warm air into the freezer and caused frost to form. Also, our ice and water dispensers stopped working.
Swapping out the ice dispenser damper door was pretty easy- just used a combination of screwdrivers to remove the dispenser assembly, popped the old damper off, put the new damper on. Replacing the control board was only a bit more complicated- unplugged the fridge, removed the control board metal cover (beware the somewhat sharp edges), unhooked all the cables from the board, used needle-nose pliers to pinch each plastic spacer/fastener as to not damage them while removing the old board, mounted the new board where the old board was, and plugged in all the cables (they were all different enough from each other that I didn't have any trouble figuring out where they were supposed to connect). I now have my fridge plugged into a surge protector- hopefully that will protect this new board I've installed. Thanks a bunch,PartSelect. Read more...
Videos!
Your Price
$31.59
  In Stock
Kenmore Refrigerator Dispenser Overflow Grille
★★★★★
★★★★★
21 Reviews
PartSelect Number PS11739623
Manufacturer Part Number WP2206670B
This grille is located on the bottom of the ice/water dispenser to catch the overflow. (Black)
Fixes these symptoms
Installation Instructions
Raymond from Coconut Creek, FL
Kitchenaid refrigerator shelf frames were cracking, needed replacement
I had to purchase two shelves and adjustable brackets - though I only needed the slidign glass shelves . Customjer service rep was helpful and pleasant, though the replacements shelves did not bear the Kitchenaid Logo or frosted scheme on glass shelves (I requested and was informed that the replacement shelves would match my Superbra) - Otherwise, parts, when available, were shipped and arrived in well packaged boxes and not damaged. Parts were cheaper than Kitchenaid, though I would call Kitchenaid first to inquire about matching parts prior to ordering from partselect, if that matters to the buyer...Matching shelves may not in fact be available from manufacturer due to age of appliance. Read more...
Videos!
Your Price
$49.56
  In Stock
Kenmore Refrigerator Water Dispenser Actuator
★★★★★
★★★★★
17 Reviews
PartSelect Number PS1526383
Manufacturer Part Number 241682003
Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.
Fixes these symptoms
Installation Instructions
Jonathan from Universal City, TX
Water actuator broke
If you think you probably can't do this, you're like me... but you just had to try because you needed the part anyway right? This really was quite simple, a lot easier than it sounds from the description and saved me probably $75 I'd have had to pay a tech to do it. Just unplug fridge, yank that water spill tray out, yes yank, it's a bit hard to do that if you've not done it before. After that remove the 3 phillips head screws you just gained access to. Lift panel frame up then out. Disconnect wire harness plug and set that frame aside. Take out next screws exposed to free the unit. Tilt unit out and remove the two little screws and shims holding actuator in place. Remove broken one. Put new one in. Reverse all actions taken thus far. Plug fridge back in and have a drink of water like nothing ever happened. : ) You can do this! Read more...
Your Price
$112.49
  In Stock
Kenmore Refrigerator Water Dispenser Actuator
★★★★★
★★★★★
18 Reviews
PartSelect Number PS1526418
Manufacturer Part Number 241685703
Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.
Fixes these symptoms
Installation Instructions
Jerome from Yardville, NJ
Water dispenser actuator snapped in half
Unplugged refrigerator. Pull forward on tray at bottom of water & ice dispenser to remove it. Remove three screws. Push up and then pull out to remove black cover around dispensers. Be careful not to break ribbon cable. Pulled ribbon cable from green circuit card on the cover. Set the cover aside. Removed green circuit card from refigerator (six small screws). Had to unplug two wires to do this. Set this aside. Make sure you remember which connector each wire goes in for re-assembly. I ended up removing the entire assembly, it was easier to work on. There were a couple more screws to remove and then you can carefully pull the entire assembly down and toward you to remove it. This meant removing the water supply line from the dispenser. Pushed up on the water supply line with needle nose pliers to "unstick" it and make it easier to pull out. Used needle nose pliers to unplug wires from broken actuator from the circuit card. Make sure to unplug the correct one. Unscrewed the two screws that held the metal plates thet held the actuator in place. Cut the wires to make it easier to remove the broken actuator and pull the wires through Installed the new actuator and screws. Routed the wire through and plugged it in to the circuit card. Now the hardest part, and I would not have figured it out without a tip from this website. There was no slack in the water line and it was impossible to push the end of it back into the hole in the dispenser assembly. Open the refrigerator doors and remove the black cover at the bottom. The water line goes up through the freezer door from the bottom. It was easy to push an inch or two of slack up through the door. Then I could grab the water line and insert it in the hole in the dispenser. Re-connect the wires that were disconnected and replace the assembly in the freezer door. You can pull slack in the water supply line back down from the bottom if needed. Replace the screws that hold the dispenser assembly in place. Replace the circuit card. Then I had to push the ribbon cable back into the slot in the circuit card in the cover. I had to remove the circuit card from the cover to get at the slot. Push the cable into the slot and re-install the circuit card in the cover. I needed to have my son help me here as a second set of hands was needed, the ribbon cable is short. Replace the cover, be careful not to damage the ribbon cable. Install the three screws and snap the boittom tray back in place. Re-install the black cover at the bottom. Works great. Read more...
Your Price
$260.29
  In Stock
Kenmore Refrigerator Dispenser Funnel Guide
★★★★★
★★★★★
9 Reviews
PartSelect Number PS8746715
Manufacturer Part Number 242270102
This dispenser module is for refrigerators. Dispenser module attaches in the dispenser housing on the freezer door and includes the cradle, ice chute and ice chute door. Safely store any food that could deteriorate while the power is off. Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Installation Instructions
CHRISTINA from ESCONDIDO, CA
Water dispenser would not auto shut off
I watched a YouTube video and followed along. Easy!! Read more...
Videos!
Your Price
$15.94
  In Stock
Kenmore Refrigerator Ice Dispenser Door Chute
★★★★★
★★★★★
7 Reviews
PartSelect Number PS11739035
Manufacturer Part Number WP2180353
*Please note, this door chute is no longer being manufactured with a heater.
Fixes these symptoms
  • Door Sweating
  • Door won’t open or close
  • Frost buildup
  • See more...
Installation Instructions
Jeff from Parchment, MI
Water dispenser not working, Ice dispenser chute icing up
I removed the outer ice/water dispenser cover following directions I found on-line (push down and gently pry out at the bottom). I then removed several nut-head screws which were holding a plastic plate which had the door light and electric control wiring mounted in it. Behind that I found a broken tab on the Control Bracket which was why my water dispencer was not working and I found the chute door for the ice maker was chewed up which allowed warm air into the chute and was causing my ice build up problem. Replacing the Control Bracket was easy. Just note how things come apart. Putting the chute door in was a little more complicated, but again, note how things come apart and you should not have a problem putting it back together. Read more...
Your Price
$39.84
  In Stock
Kenmore Refrigerator Dispenser Door Flap - Black
PartSelect Number PS1526427
Manufacturer Part Number 241688501
Videos!
Your Price
$49.25
  In Stock
Kenmore Refrigerator Ice Dispenser Door Seal
★★★★★
★★★★★
1 Review
PartSelect Number PS1526429
Manufacturer Part Number 241688701
This part works in conjunction with the ice chute door.
Fixes these symptoms
Videos!
Your Price
$15.92
  In Stock
Kenmore Refrigerator Dispenser Grille - Black
★★★★★
★★★★★
7 Reviews
PartSelect Number PS11738664
Manufacturer Part Number WP12999301B
This dispenser grille catches any overflow from the ice/water dispenser.
Installation Instructions
Gabriele from Phoenixville, PA
Dispenser Was Damaged In Dishwasher
I just exchanged it, was really easy. Ordering of your well set up internet page was very easy and the part arrived extremely fast price was very competitive. I am very happy with the service provided. Read more...

Related Kenmore Refrigerator Parts

Back to Top