Hotpoint Microwave Grates

Your Price

$138.07

Hotpoint Microwave Vent Grille

★★★★★

10 Reviews

PartSelect Number PS651261

Manufacturer Part Number WB07X10530

This grille does NOT come with screws. This vent grille mounts on the top of the microwave above the door.

Installation Instructions

Donald from Bellingham, MA

Grill needed replacing - it literally fell apart

The grill is located on the top of the microwave - above the door. The plastic seems to have just deteriorated - the plastic around the screws just cracked. There was also another crack on the side of the grill assembly. The micrawave is fairly new (4 years old) and we don't use any harsh cleaners on the plastic grill because it has never required it. The unit is also vented to the outside - so it doesn't get exposed to alot of heat. To put on the new grill - it took 5 minutes, two small phillips head screws. My only question is why did the plastic just fall apart Read more...

Your Price

$180.86

Hotpoint Microwave Vent Grille

★★★★★

1 Review

PartSelect Number PS752092

Manufacturer Part Number WB07X10525

This black vent grille mounts on the top of the microwave above the door. Screws are NOT included.

Installation Instructions

Scott from Mercerville, NJ

Grill was cracked and Filter was wearing Out

First I removed the old air/grease filter from the exhaust fan. It get washed monthly, so after several years of use, it was time to replace it. Once the old filter was removed, I opend the new filter package, slide the new filter into the filter slot from left to right. Once in all the way, I slide it back to the right to set it completely.

Second I began work on the cracked grill. I removed the phillips head screw on the left side of the grill, then removed the phillips head screw on the right side of the grill. I pulled the old grill off straight out. I opened the new grill package. I started to install the new grill by insert the bottom part first, then insert the top tabs and guide second, make sure I pushed slightly on the grill so it seated top and bottom at the same time. I installed both phillips head screws, left and right side, and completed the job. Read more...