General Electric Range Cooktops

Your Price

$915.83

General Electric Range RANGETOP GLASS Assembly - Black

PartSelect Number PS11762851

Manufacturer Part Number WB62X26649

Main top assembly WB62X26649 houses the burners and provides a stable surface for cookware. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

Your Price

$1136.32

General Electric Range MAINTOP GLASS Assembly DG

★★★★★

2 Reviews

PartSelect Number PS12299348

Manufacturer Part Number WB62X29262

This main top is for ranges. The main top provides a stable cooking surface and houses the surface cooking burners. Unplug the range before installing this part. Wear work gloves to protect your hands.

Your Price

$1012.37

General Electric Range RANGETOP GLASS Assembly

★★★★★

5 Reviews

PartSelect Number PS11726723

Manufacturer Part Number WB62X25972

Main top assembly WB62X25972 houses the burners and provides a stable surface for cookware. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands. (GY)

Installation Instructions

Michelle from SAINT LEONARD, MD

Replace cracked cooktop

Replacement was not very difficult but did require some time. I unscrewed the two areas holding the cooktop in place, slightly lifted the unit up then slid it over a bit to remove from the back area. This unit has the burners affixed to the underside of the cooktop using brackets. Instead of working underneath the raised unit I decided to unhook the cabling in the back and fully removed the cooktop. I moved the cooktop to a flat surface and then I was able to easily remove all of the screws holding the brackets to the burners. I moved all the hardware to the new unit and replaced the cooktop. I was able to dissemble the unit myself but it was helpful having an extra set of hands when it was time to put the new unit in place. Tools used were a socket wrench and a screwdriver. Read more...

Your Price

$173.01

General Electric Range Flat Cooktop - Bisque

★★★★★

1 Review

PartSelect Number PS253656

Manufacturer Part Number WB62K10064

Your Price

$148.28

General Electric Range COOKTOP WHITE

★★★★★

1 Review

PartSelect Number PS956894

Manufacturer Part Number WB62K10083

Installation Instructions

Daniel from Osseo, MN

someone sat on cooktop and dented it

took off burners, removed screws one at a time, only tough part was getting to grounding screw so i took off back plate (easy) to get to grounding screw. i recommend doing it all at once with no break so you remember where screw went, or mark them with sharpie. it was fun once i got started. good experience and now it looks like new. plus i didn't have to clean the old one. Read more...

Your Price

$1082.75

General Electric Range Main Top Assembly

★★★★★

3 Reviews

PartSelect Number PS11726721

Manufacturer Part Number WB62X25968

This main top is for ranges. Main top provides a stable cooking surface and houses the surface cooking burners. Unplug the range before installing this part. Wear work gloves to protect your hands.

Your Price

$859.41

General Electric Range Maintop Glass - Black

PartSelect Number PS2322190

Manufacturer Part Number WB62T10694

Installation Instructions

John from Dadeville, AL

Replacing the glass Maintop

Don't order new gaskets--they come installed on the new maintop.
1. Pull oven out from the wall,
2 Remove two screws, one on each side toward the rear.
3. Remove the controll faceplate by removing the four rotary switches and unscrewing the retaining rings underneath the rotary switches. When lifting the faceplate, be careful to disconnect the wiring harness attached at the bottom of the right third of the facepalte to avoid bending the tines.
4. Removing the faceplate gives you access to six screws (nutdriver) attacing the mainoven to the glass top unit. Remove them all.
5. Slightly lift the glass top and tilt from the rear toward the front to get access to the underside.
6. There are 4 burners and the "surface hot" light unit attached to the bottom of the glass top. Disconnect the surface hot light by easing it out and let it hang, Remove the burners (recommend right to left) by unscrewing (nutdriver) the screws which hold the nine burner retaining clips . Lay the burners on the oven.
7. Remove/discard the old glass top.
8. Use a towel folded over to provide a cushion under the front edge of the new glass top as you install the new burners.
9. Install everything in reverse order. Read more...