Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
Enter your model number and our Instant Repairman will help diagnose and fix your appliance
There should be a removable kickplate found at the bottom of the dryer. Remove this kickplate by removing the two screws found at the bottom. Let the kickplate drop down just a little to disengage the two pins found on its top.
If your dryer has an enamelled top, you can raise it by releasing the two spring catches found under it. Use a putty knife (or some other thin and flat object) to push in on and disengage each catch.
Remove the two screws (some models will have four) that secure the bottom of the front panel. As you remove the front panel, disconnect the door switch and any other wiring, taking careful note of which wires are to be reconnected where.
If your dryer has a galvanized top, remove the screws from the front panel, and then remove the front panel itself. As you remove the front panel, disconnect the door switch and any other wiring, taking careful note of which wires are to be reconnected where.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.