Oven wouldn't heat

ApplianceAmana Range


Level of DifficultyEasy

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Screw drivers

Rodney From Downers Grove, IL

Aug 15, 2007

10 out of 13 people found this instruction helpful

Replace the dual gas valve assembly for both the broiler and oven by removing the lower drawer. Then removing the drawer's right side sliding bar, and turning off the gas at the input to the valve assembly (a small part between the valve assembly and the inlet gas tube). Then unscrew the two outlet gas tubes and the gas inlet shut off assemble. Then remove the holding brackets to remove the valve assembly. I found that when the new gas valve was replaced, if the oven still does not turn on, you have to adjust the gas outletto the oven by using an allen wrench inserted into the opening of the outlet valve of the valve assembly. It has to be done several times at small incremental turns (about a 1/4 turn at a time) to get the right amount of gas flow and have it completely shut off when the oven is turned off. I found this out by taking the old valve apart of see how it works.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL Y0316220 (Now subbed to Dual Oven Safety Valve)

Part Number: PS2194801

In Stock