No heat, would not light because igniter burnt out

ApplianceAmana Dryer

Model

Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

anthony From Port Arthur, TX

Sep 03, 2008

4 out of 6 people found this instruction helpful

Unplug dryer. Remove the front bottom panel of dryer 2 screws, then unplug wire connector to the old igniter then unscrew one screw holding ignitor then wiggle out. Open new igniter wiggle back in place insert screw tighten, (getting this screw back in is a little hard) replug wire connector to new igniter replace front panel with two screws. Plug in dryer and there you go drying clothes again. Wife all happy again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Igniter Kit

Part Number: PS334180

$22.31
In Stock