The power had gone out and must have sent a surge that fried the ERC. I didn't know that but looked up the "F1" error code that was displayed on the screen online. Once I knew what part to replace it was easy. I just searched out the part on this site and ordered it. I ordered it on a Tuesday

ApplianceAmana Range

Model

Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Jeremy From Westmoreland, NY

Aug 29, 2008

8 out of 8 people found this instruction helpful

First I unplugged the unit. I removed 4 screws to remove the back plate. Removed 4 screws to remove the ERC unit. ( Plastic casing and all) Peeled the front cover off the old unit and stuck it on the new. Removed one wire at a time and plugged it into the new so I didn't mess up the wiring. screwed my 8 screws back in, plugged it in, and started cooking.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 77001219 (Now subbed to Electronic Range Control)

Part Number: PS2091146

Recycling Rebate Available No Longer Available