there was a squealing noise when the dryer was in use.

ApplianceWhirlpool Dryer

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers

James From Ctr. Barnstead, NH

Aug 27, 2008

2 out of 2 people found this instruction helpful

I removed the 2 screws in the lint filter. Then pried up the top of the dryer. I removed the 2 screws inside the front panel at top.I then unplugged the wires inside attached to the front panel. I pulled up on front panel and removed it. I then lifted out the drum and set aside. I replaced the 2 drum wheels prying off the plastic retainers. I didn't relpace the tension pulley as I didn't have one. I took old belt off drum and replaced it with the new one and replaced drum. I held up the drum with a bungee cord while I rethreaded the belt. I put the front panel back on and replaced the screws. I then plugged the wires back together. I put the top down and then replaced the 2 screws in the lint filter. I relaced the lint filter and tested the dryer. The noise was gone and new belt installed. fairly simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Multi Rib Belt - 92-1/4"

Part Number: PS346995

$13.70
In Stock

Drum Support Rollers

Part Number: PS347627

$17.49
In Stock

Idler Pulley Assembly

Part Number: PS383724

$11.96
In Stock