ApplianceGeneral Electric Refrigerator
Level of DifficultyEasy
Time to do repair30 - 60 mins
Age of Appliance5 - 10 years
moved refrigerator away from wall and unplug it from electric outlet, turn water supply to the Water Valve off, removed 4 screws that hold refrigerator back cover, move cover out and removed water supply line from valve, removed 1 screw that hold the Outlet Water Valve and remove it slowly until you can disconnect electric wires. Cut plastic water lines with box cutter or cutting tool at the valve. To install push water lines into new valve, they will selfsecure, each one is different size and there will be no confusing which one go where, if electric plugs are diferent, adapter are provided, just plug them in and the plug in electric wires and then reverse the the order of disasembly to finish. (hint, before installing back cover check for leaks).
the slide rails are very easy to replace, just remove the old one with a cross tip screwdriver and replace.
actuator pad was very easy to replace, pull old one out and push new one in place.