If you placed an order on ApplianceHelp.com the order is still valid and you can check on its
status and make changes here on PartSelect.com. Click here for more details.
Level of DifficultyEasy
Time to do repair15 - 30 mins
Age of Appliance5 - 10 years
22 out of 27 people found this instruction helpful
Unplug the refrigeratorFront cover of ice dispenser snaps off. Remove the 4 screws from the ice chute. Unplug the control module that opens the ice chute. Leave hanging while removing the 4 screws that hold the solenoid in place.(one is a ground wire...note location before taking apart). Unplug the two wires to the solenoid.To install the new solenoid put the plunger in place and at the same time hook on the trip arm of the clapper door of the ice chute. Plug in the two wires to the new solenoidReplace the 4 screws.Plug in the Control modules and screw back in placePlug in the refrigerator. Do a trial test.Replace the cover
Were these instructions helpful?
Part Number: PS304961