Level of DifficultyEasy
Time to do repair30 - 60 mins
Age of Appliance5 - 10 years
Screw driversSocket set
7 out of 9 people found this instruction helpful
I pulled the face of the dry off by removing the two screws on the lower face below the door. I pulled the drum out by removing the two bolts holding the drum mounts to the frame. I put the new belt around the drum and remounted it. The access hole on the lower right corner on the back of the appliance allowed me to turn the drum to align the belt (and turn it right side up) with the pulley. It took a moment to figure out how to re-thread the pulley but was able to do it after only a couple of tries. All in all it was quite easy!
Were these instructions helpful?
Part Number: PS2200550