water actuator needed replaced

ApplianceFrigidaire Refrigerator

Model

Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

GEORGIA From SAPULPA, OK

Aug 07, 2008

1 out of 1 people found this instruction helpful

First I removed the water drip tray. Next I removed the three screws on the bottom edge of the face. Then I removed the whole face, being careful not to break the tabs at the top of the face. Next I unplugged the small plug on the top of the back of the face. The face completely removes. Then I removed 3 more screws that hold the whole inside unit in place. One screw on each side and one on top. I gently pulled the unit far enough out to work behind it, but did not remove it all the way. Next you will see two small silver plates (one with 2 screws one with 1 screw). Remove those screws and plates. The actuator will come right out with little effort. Put the new actuator in, then reverse your steps to put it back together. Your done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Dispenser Actuator

Part Number: PS1526383

$21.16
In Stock