Ice crusher/dispenser would run but no ice would come out.

ApplianceGeneral Electric Freezer

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Screw drivers

JOHN From KINGSFORD, MI

Aug 14, 2007

19 out of 28 people found this instruction helpful

I removed the ice drawer,dumped out the ice and found the front end of the clear plastic auger and the crusher housing cover were broken. To dissassemble the auger system, I removed the phillips head screws that hold the crusher-dispenser onto the drawer, took off the washer and extrernal snap-ring from the auger shaft end. After removing the auger assebly, I pressed in on two plastic catches (on the dispenser housing) and gently pried the dispenser from the drawer with a small flat screwdriver. Then I removed the plastic nut from the end of the auger. Ass'y was much easier once the parts arrived. This repair would probably be too much for the average homeowner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Front Dispenser Auger Nut (Now subbed to Ice Bucket and Auger Assembly)

Part Number: PS783767

$130.30
In Stock

Dispenser Crusher Cover

Part Number: PS964165

$11.11
In Stock

Ice Bucket Auger

Part Number: PS964350

$29.00
In Stock