Level of DifficultyReally easy
Time to do repairLess than 15 mins
Age of Appliance5 - 10 years
Vince From El Cajon, CA
Aug 13, 2007
71 out of 79 people found this instruction helpful
First, I tested the ice maker "switch" that actually just covers the beam that regulates the ice maker. In the "off" position, it still made ice. Then, I removed the three screws on the cover over the transmitter and disconnected the circuit board at the wire connector. It stopped. After ordering and receiving the new transmitter and receiver boards, I replaced both boards. They are located on either side of the freezer compartment under panels held in place by three screws. Probably saved 150 to 200 bucks.