We had a lighting strike and it burned out some of the control function on some of the buttons

ApplianceJenn-Air Range

Modeljjw9130dds

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Drew From Linden, MI

Jul 18, 2008

2 out of 3 people found this instruction helpful

1st I removed the screws holding in the wall oven. Then I turned off the power. with the nut driver I removed the top plate on the oven. this exposes the electronc controls. with the nut driver, I removed four screws holding the electronic controler to the panel. then I unpluged the two tape strips that go to the control panel takeing note which one went where. At this point I removed the remaining screws on the ends to remove the old control panel. Then I had to remove the adapter plate from the old panel and apply it to the new panel . then I Just put it all back the way it came out. It works fine. I saved my self all that money for a repairman.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 74008958 (Now subbed to Control Panel - Stainless Steel)

Part Number: PS2357956

$216.22
On Order