Cancel button would not work on the front flat panel

ApplianceJenn-Air Range

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Carl From Walford, IA

Jul 18, 2008

2 out of 4 people found this instruction helpful

I replaced the control circuit boards first assuming that the problem would be in the circuit rather than the flat panel, but it ended up being the flat panel. In the future, do not replace the circuit boards unless they are smoked. Very easy to get the flat panel off except for the 2 screws at the front bottom of the panel. Maytag assumes you would remove the whole assembly, but it is easier to use a stubby screwdriver, just be careful that you do not drop a screw into the gap and down into the frame.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 74008649 (Now subbed to Backguard Panel - Black)

Part Number: PS2357626

No Longer Available