Washes OK but no spin

ApplianceWhirlpool Washer


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set

Joseph From Naugatuck, CT

Jul 03, 2008

1 out of 1 people found this instruction helpful

First ,no need to move washer.
Remove 2 screws on bottom front of control panel.
Lift panel up.
Disconnect switch plug from top of cabinet.
Remove 2 gold colored clips under panel by
prying up with 2 screwdrivers.One flathead on
front of clip the other under the center of clip.
Now you can tilt the whole cabinet forward.
Place cabinet on floor.
Remove plug connector,remove top screw to remove retaining clips X 2.
Remove 3 screws holding lid switch and ground
wire.I had to redrill groundwire hole because the
hole stripped.(No biggie if you have a drill.)
By this time you should know how to replace the
switch and cabinet.
Make sure bottom lip of cabinet is under the frame when tilting back up.
Give yourself a high-five.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly with Leads

Part Number: PS350434

In Stock