Fred lifted the top and broke all the tubing to the burners

ApplianceMaytag Range


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Wrench set
Screw drivers

matthew From ogden, UT

Jun 11, 2008

5 out of 8 people found this instruction helpful

I order the replacement parts from parts select and they arrived in 3 days. To remove the old parts it only required an open end wrench and a screw driver. The gas lines were removed from the valves and the entire tubing system was unscrewed from the range top. As the tubing was broken this was easy. As for the installation of the new parts that was a bit more difficult. Freddy helped me hold the range top up about 4" in the front and the tubing had to be carefully bent to mate with the valve fitting. With all the fittings tightened the oven was tested for leaks and all was ok. The burners were all working and the home that was without a stove for 8 weeks is now ccoking with gas. As anote I did place two metal tabs on the oven with pop rivets so Freddy won't break the new lines.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 12001075 (Now subbed to Burner Tube and Fitting Assembly - Right Side)

Part Number: PS2002842

In Stock

USE WPL 12001076 (Now subbed to Burner Tube and Fitting Assembly - Left Side)

Part Number: PS2002843

In Stock