The motor started make a noise and finally quit.

ApplianceWhirlpool Dishwasher

Model

Level of DifficultyEasy

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers
Socket set

Donald From Kennedell, PA

Jun 11, 2008

2 out of 3 people found this instruction helpful

I turn the electric at the fuse box. Iturned the water off, I remove the disk washer from under the counter. I disconnected the electric wire,water line and drain. I turnered washer on the side remove the 3 sensor plugx plugs and drain tub from the motor sumo unit. I removed the Plastic wedges holding the motor sump unit . To get motor work space I placed unit upright on 4 by 4 s. I set the sump unit in places carful to set the gasket. this took a little time. I put the plastic wedge in the back. I held the unit place with one hand put thre wedge under the door next. The third wedge was next and was less of a struggle.. I connected the Plugges and draind and other parts I had to take from the old unit. I installed electric water and drain.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Sump & Motor Assembly (Now subbed to Pump Motor and Housing Assembly)

Part Number: PS2363094

$173.20
In Stock