No spin cycle

ApplianceMaytag Washer

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Jonathan From Westfield, NJ

Jun 07, 2008

11 out of 11 people found this instruction helpful

Popped-off the trim disc in the center of the timer knob to expose the locking clip. Then used a small screwdriver to pop it off. Then carefully removed the knob (careful, there's a spring inside). With the knob removed, you now have access to the two bolts that hold the timer in place. Removed them. Removed the screws that fasten the control panel and flipped it down and forward. Disconnected the wiring harness from the timer. Then reinstalled the new timer in the reverse order of disassembly. Viola'!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 22001255 (Now subbed to Timer)

Part Number: PS2019466

$131.98
In Stock