Tray drive motor was worn out; tray did not turn, and a grating noise came from the oven

ApplianceGeneral Electric Microwave

Model

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Joel From Norwalk, CT

May 30, 2008

0 out of 1 people found this instruction helpful

1)Removed the screws holding the bottom cover of the microwave (this is an over-the-stove mounted microwave), the panel was hinged so it stayed in place. There were approx 10 screws to remove.
2)disconnected the motor (easy snap off)
3)removed the motor (2 screws mounted it
4)mounted the new motor, plugged it in, screwed the bottom panel in place and it was ready to go.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drive Motor

Part Number: PS237772

$39.45
In Stock