Upgraded kitchen to Stainless Steel Appliances

ApplianceMaytag Dishwasher

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Wayne From Waterford, WI

May 28, 2008

10 out of 13 people found this instruction helpful

Shut off the power. Opened dishwasher door fully and removed 10 screws around outside edge. Lifted the inside panel up carefully and set to side with wires attached to soap dispenser. Removed two screws that held handle in place and removed wires. On the bottom o fthe door there are 4 screws 2 on each side that have to be removed from the hinges. You can now remove front panel. Take four screws out of control pad that hold the pad to the front panel. Simply reverse steps to reassemble. Takes about 30 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL W10130695 (Now subbed to Door Handle and Latch Assembly with Switches)

Part Number: PS2180047

$23.96
In Stock

USE WPL 6-917696 (Now subbed to Exterior Door Panel)

Part Number: PS2340942

$144.96
In Stock

USE WPL 6-918794 (Now subbed to Control Panel with Touchpad - Black)

Part Number: PS2341001

$159.34
In Stock