Washer tub stopped turnig and motor made a humming sound

ApplianceJenn-Air Washer


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers
Socket set

Craig From Mount Shasta, CA

May 28, 2008

2 out of 4 people found this instruction helpful

Removed top cover, then removed front cover. Put washer on its side and removed belt. Located motor, noted orientation of retainer wire(v shaped wire that clips motor to frame), removed motor, noted wiring diagram on paper before removing wires from termination points, removed wires. installed new motor, installed wiring, installed wire clip. Turned washer on side and installed new belt. Turned machine on and it worked great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 21001170 (Now subbed to Motor with Pulley and Plate Assembly - 120V)

Part Number: PS2017711

In Stock

Drive Belt - 51 inches long (Now subbed to Drive Belt)

Part Number: PS2018741

In Stock

Lid Hinge (Now subbed to Lid Hinge)

Part Number: PS2037922

In Stock